mwemaxxowner's latest activity

  • M
    mwemaxxowner reacted to RDspaguy's post in the thread Equipotential Bonding with Like Like.
    I try not to think whenever possible. It usually gets me in trouble. ;) Bonding is more about the equipment than safety, and is meant...
  • M
    mwemaxxowner replied to the thread Equipotential Bonding.
    I understand that. I'm not sure how to bond the double insulated intex pump, as there is no bonding lug and it is all plastic. Aside...
  • M
    mwemaxxowner replied to the thread Equipotential Bonding.
    Little sneak peek of where it is after finishing up for today! I've used some old scrap carpet padding to insulate it (saved it after we...
    • IMG_20210117_172927179.jpg
  • M
    mwemaxxowner replied to the thread Equipotential Bonding.
    I have read the above link, but continue to go back and review it and other resources in my spare time and as I work out this project...
  • M
    mwemaxxowner reacted to JamesW's post in the thread Equipotential Bonding with Like Like.
    I suspect that 1 bond would suffice, but I would suggest bonding at a minimum of four (4) points uniformly spaced around the perimeter...
  • M
    I'm working on building us a stock tank hot tub/pool. Based on what I can find in the NEC (not that I'm incredibly familiar with it)...
  • M
    mwemaxxowner replied to the thread Stenner Econ T?.
    My pool has a decommissioned FROG system. The top of the housing for the frog cartridges had a nice thick flat spot to drill and tap a...
  • M
    I don't think I see a problem transporting 15 gallons or so. I used to haul e85 55 gallons at a time. I have a 55 gallon drum set up to...