Recent content by MARV19

Hello Jim, As always thanks for your time and reply. I'm surprised that even after 3-4 years of transitioning to 5 position or multi position valve actuation, we are still stuck with TWO position intelli valve actuation as compared to so called or expected 5 position intelli valve actuator...

Greetings All, Is there any update or new information about Multi position intelli valve actuator automation by Intellicenter?. Thanks

Hello Marty, Thanks for your reply and suggestion. Appreciate your time to respond to my query Marv

Jeff, Thank you for your time to respond to my query, plus thanks for the suggestion. I’ll proceed accordingly. Marv

All, Greetings. I’ve recently bought Intelli Center I10PS kit with power and load center automation . I’m planning to use 6 intelli valve actuators. Do I need i10X module or not?. I would greatly appreciate your responses. Thanks Marv

I've a electric heater for pool, gas heater for spa. Spa has two main Drains one connected to pool suction side with a single return(two 2" pipe spa floor return for spill over ). The other spa main drain is connected to the SPA pump. I understand the flow restriction by putting dedicated SPA...

Thank you for your suggestion. Since I've dedicated pump and gas heater for SPA jet operation and to have a chlorinated fresh water in SPA, I can simply run the filter pump in spill over mode, right?. Yes the down side is running two pumps and electric bill.

Jim, Thank you.

Hello Jim, Thank you for your time, also for the quick reply. Yes, I already purchased Intelli center automation with IC60 load center along with the IC60 cell from Polytec Pools. It is a i10PS kit. You made a good point about SPA not getting chlorinated water in SPA mode and the potential of...

Hello All Greetings. We are in the final stage of connecting everything to the equipment pad. We have infinity edge spa attached to pool. We just want to chlorinate SPA by only spillover mode. Could you please verify the attached plumbing diagram is the right one for spill over mode. Do I need...

Hello Allen, Thank you for your alternative suggestions as well as dealer referral. I'll reach out to them. MARV

All: Greetings. I want to know immediate availability of PentAir Part number: 581406FRW. It's been more than 6 months passed since my pool builder told me this item has been ordered through his local supplier. Till today, it has not been delivered or he can not give me a time window when it will...

Greetings All: I request you to review the attached updated final plumbing diagram. I’m particularly need your feed back on Motorizer Valve Actuator placement either to control flow direction or features. Also, do I need to do anything extra in terms of plumbing for SPA “spillover”. I would...

ajw22: Thank you for your time to respond my question/concern. I plan to purchase PentAir XF variable speed pump as a dedicated pump for spa jets. I’ll be happy to listen to your pump recommendation.