Recent content by kingfish1982

I have the tf100. I currently use 10 MLS pool water then powder, then count drops and divide by 2 once clear to get fc. When I'm slamming counting 44 drops sucks. Is there a way to do this easier with less drop counting? More water and divide by 4 maybe? Thanks in advance

Latest results Ph 7.5 Fc 16 Cc 0 Ta 130 Ch 75 How does one bring down TA or will it happen on its own. https://photos.app.goo.gl/U4QRoNeu9fHsazFz5

https://photos.app.goo.gl/i2zWT6ARSHGKo7jP8 It will not let me upload photos so I created a link

Yesterday opened pool was cloudy yesterday so I started slam cya 50 fc kept at 20 . Today water has cleared but this evening when I went out to check fc/ph there is a bunch of black stuff on bottom. The pool was swept and vacuumed today clean bottom this morning after vacuming. Is the black...

Little cloudy still going to keep to slamming

Today's results Ph 7.2. Add 36oz borax to bring to 7.5? Fc 21.5 Cc 0 Cya 50 Ta 120 Ch 100 What do you guys think ahy suggestions should I be worried about ta and ch? Slamming the pool dt cloudy water.

Let me know how is goes. I'm going to flex seal mine as it's only a few drops an hr. Maybe if yours goes well I will try mine.

I added cya powder dissolved in a bucket of water used a paint stirrer to dissolve it then put it in the pool

So here is what I did I added 2lb 11oz cya 143 oz 12.5% bleach 90oz borax 20 mule Will retest in morning

Test results Ph less then 6.8 Fc 2.5 Cc 0.5 Cya 10 Ta 90 Ch 75

Have a tf100 test kit, going to test water tonight. Curious is there a correct order to test the water? Once tested what do I adjust 1st and so forth. Just opening pool today. Will post numbers soon after I get an answer to what order to test things. Thanks Jason

I have an above ground pool installed last year vinyl liner. Skimmer [hayward wm] is leaking and faceplate has small crack. I ordered replacement, will I ruin my liner if I remove the old Skimmer to replace wth new skimmer?

Have an 18ft above ground. Besides drainage of water and brining fc up to slam level do i need to add anything else prior to winter cover placement. Next question i need a winter cover do I get a solid or A fine mesh cover. I plan on using a pillow in the middle as well. I am closing once...

Most recent tests. Ph 7.8 I added acid to bring down to 7.5 Cl 9 Cc 0 Ch 100 Ta 130 Cya 50 Do i need to worry about my ta of 130 will my addition of acid bring down the ph and ta?