Recent content by Hmelton

  1. H

    Aquabot S2-40 flips over

    This bot is a floor only bot. Impeller rotates to expell water through a one way flap, then reverses through the other flap. Intakes on the bottom through the filter bags. I added a bit of pool noodle to provide mor buoyancy. Seems be better.
  2. H

    Weighing down pool cleaner cord...

    I have the same issue right now with crepe myrtle flower petals. While they are pretty, they do gather on the cord. If I resolve my 'robot flips over' issue, maybe some fishing weights added in a few spots would work. Use a swivel and tie it to the cord with mono-filament.
  3. H

    Aquabot S2-40 flips over

    I've had a aquabot cleaner for two seasons and this season started to flip over after trying to climb the walls (which it is not supposed to do). The fine dirt on the bottom also is not being picked up. It scoots along just fine so appears to have plenty of power. I added a rock to see if...
  4. H

    2019 Bleach Prices

    Leslie’s is running a Veteran 10% discount this weekend. With club the 12.5% ends up at $4.28 per gallon. Just filled new 24’ so have to get the SWG running this weekend.
  5. H

    Central Texas Pollen - Update with Storm mess

    The green tint was the pollen, FC held up well and 0 CC. Robot and the skimmer choked 2x per day at the peak. Finally done for the most part. Cheer up! Pecan is ready to start next! LOL
  6. H

    Pool Decoration

    I did a border of 15" around my Intex with pebbles and put pots of flowers and solar lights as well. It is contained with a rubber border from Lowes. (Rubberific 4-ft Black Landscape Edging Section). The pebbles show footprints but they are easy on the feet if you have to get in there to...
  7. H

    My $25 auto chlorinator DIY project

    I was thinking of combining this pump method with a specific gravity feed for when we are away. It could be run with a internet enabled outlet allowing adjustments remotely. Using the same AW-20 pump (if Amazon actually ships the right one this time!) mounted outside the pool just below the...
  8. H

    24 Ft AGP Circulation Issue

    I like the idea of being able to run everything at once if needed. If I get ambitious, maybe an Internet of Things set up to control the speed, turn on fountains, pump through a solar collector for heating Oct/April (night for cooling in the summer?), maybe even misters off the pump! LOL...
  9. H

    24 Ft AGP Circulation Issue

    That one was a single speed, d'oh! Ordered a dual with 21" sand filter setup that should get me to zen again. https://amzn.com/B002HHM020
  10. H

    Temporary Intex Take Down

    I did that very thing to move my 24ft round Ultra Frame back in the yard 10ft. Just be sure you don't trap debris under the liner when placing it back. I have a few grass clumps between my liner and the nice smooth foamboard. Oh well.
  11. H

    24 Ft AGP Circulation Issue

    I found this on Amazon, 1.5 HP Pump, 23 inch sand filter https://amzn.com/B002EL40P4 This timer can be added https://amzn.com/B003LSBWAU Not fully programmable, but it will allow dual speed operation in 6 hour chunks.
  12. H

    24 Ft AGP Circulation Issue

    I hard plumbed my intex ultra frame with a through wall skimmer and two returns (I have a second port for vac that I have not plumbed to the pump yet). The 1/2 hp 2100 GPH pump is not taking care of circulation well. I have a dead zone that collects dirt, grass and leaves that becomes an...
  13. H

    New Intex dual outlets?

    The reason they have two outlets is to prevent entrapment. https://en.wikipedia.org/wiki/Virginia_Graeme_Baker_Pool_and_Spa_Safety_Act The two inlet ball valve is likely defective, not allowing flow the other way.
  14. H

    pool cleaner, aqua bug not satisified.

    I just bought a Aquabug and it worked great. I think the key is to make sure you have enough hose on it. The hose floats making the last section vertical down to the bug. The pool bottom is bumpy (yes, wrong sand. Fixing that this winter) and the seams are not fully glued down. It picked up...