hgiljr's latest activity
-
Hhgiljr replied to the thread Hayward T-3 Model number.Disregard. I found another website that allowed me to register: https://register.hayward-pool.com/reg
-
Hhgiljr replied to the thread Hayward T-3 Model number.https://hayward.com/support/resources/warranty/product-registration
-
HHello all. I am trying to register my Hayward SWG and it is asking me for model number. I have typed up all numbers and information I...
-
Hhgiljr replied to the thread Pentair Intelliflo3 VSF model 011068.Only automation was two speed: 4 on low and 4 on high. I will set different schedules and see what works best. Thanks again for all...
-
HNo different then any automation scheduling. All depends on what your pool has and how you want yo run it.
-
Hhgiljr replied to the thread Pentair Intelliflo3 VSF model 011068.That did it. I need to go to school for this pump. lol Any recommendations in scheduled programming for this pump? I was searching...
-
Hhgiljr replied to the thread Pentair Intelliflo3 VSF model 011068.I got around to installing the pump today and works just fine except the SWG. I did the jumper as stated above and installed the SWG...
-
Hhgiljr replied to the thread Pentair Intelliflo3 VSF model 011068.It sure is plus a whole house surge protector.
-
Hhgiljr replied to the thread Pentair Intelliflo3 VSF model 011068.It is being powered by same CB through the intermatic timer. Make sense on the jumper. Thank you for your help...
-
Hhgiljr replied to the thread Pentair Intelliflo3 VSF model 011068.Aquarite is wired for 240v. Pictures attached below. Ignore the 4th wire (blue) as that was used when the pump motor was 2speed. Also...
-
-
Hhgiljr replied to the thread Pentair Intelliflo3 VSF model 011068.Great points about the larger filter, but then space becomes a problem as it is currently limited where pool equipment is located.
-
HI have a 420 sq-ft filter and clean it once per year. That is the biggest difference between a large and small filter.
