Recent content by GZelano

  1. G

    Replacing Aquapure1400

    I have been using the Aquapure 1400 for the last 15 years and have gone thru numerous cells but other than that the system has been great. My current cell is bad (3years old) and I wanted to upgrade to the true clear or something newer but do not want to get away from the iaqualink technology...
  2. G

    Salt Level IAQUALINK vs Pool Store

    HAving trouble getting pool to retain chlorine. Water is clear. decided to let pool store test and compare numbers. Said my salt was only 2200 but my Iauqalink is showing 2900 ? Generator is running at 85% for 12 hours per day and doesnt seem to be able to keep up FC-1 TC-1 CH-200 CYA-40...
  3. G

    3 x3 pool tile

  4. G

    3 x3 pool tile

    Anybody recognize this pool tile. It is 3 x 3 for my spa wall top. Cant find anywhere on Line. Not original tile. Pool builder replaced when it fell off before.
  5. G

    Raypac 406A problem

    OK Advise needed again. I am shopping online forthe best price i can find on a new raypak and some of the sites say that the cupro-nickel is a must if you have a salt water pool. Is this true or is the same heater i had ok. Mine was a P-R406A-EN-C. Also when looking a find the same model # but...
  6. G

    Raypac 406A problem

    Thanks for your help. What brand heaters do you recommend. Since i have converted almost everything over to Jandy, Would you advise using their Heater as well ? Pool and spa so i guess another 400K BTU ?
  7. G

    Raypac 406A problem

    Ok so i got the burner assembly out and i found that the whole right side of the assembly is gone. Also the floor is completely rust through on on the right side, and even the side panel braces appear to be gone (pics attached). Since i did have this running, is it feasable to get a new burner...
  8. G

    Raypac 406A problem

    So i had a Pool Service Company come out and look at my heater. Unfortunately they came when i wasn't home. The paper work says that the burner tray is almost completely deteriorated on the right side and the bottom of the cabinet is also rusted through. Advising to replace the heater. Is this...
  9. G

    Jandy VS FloPro Variable Speed Pump and iAqualink Review

    Here is a picture of the installation. Also a short YouTube video if you want to hear how quiet the pump is when it is running. http://youtu.be/3Kx-vDhb5sM
  10. G

    Who has the best variable speed pump Pentair or Jandy.

    i posted a review about a week ago on the Jandy VS Flopro. So far i love it. I love the fact that it is removable so i can bring it inside in the winter. It is so quiet when it runs that i found myself doublechecking the first week to make sure it is actually on. I also upgraded to the Iaqualink...
  11. G

    Raypac 406A problem

    Thanks, i got it fired and i am not sure but i believe the first rail is not firing. Is there a simple way to remove the burner tray. I tried looking online and in my manual, but not sure how i go about removing. I enclosed a picture of the inside front of my unit.
  12. G

    Raypac 406A problem

    When trying to use my raypack heater, i can hear the igniter clicking, then after a few seconds a explosion of some type and it actually blows the front cover off. It makes a buzzing noise and then when it tries to ignite again it does the same thing. i tried to ignite it once with the door off...
  13. G

    PoolSupplyWorld

    I would like to add that i ordered my Jandy VS Proflo from PoolSupplyWorld and they had the best pricing and the pump arrived on time. I did forget to enter my TFP code to get my discount, but that was my fault not theirs. I did try to buy my iAqualink from them as well, but their price was...
  14. G

    Jandy VS FloPro Variable Speed Pump and iAqualink Review

    Thought i would provide a homeowner review for those interested. I recently replaced a Pentair 2HP Whisperflo pump with a Jandy VS FloPro. I also had to upgrade my Jandy RS-8 control board as i had revision MM so I decided to upgrade to the iAqualink at the same time. The Jandy FloPro was super...
  15. G

    installing Jandy VS ProFlo

    My Jandy VS Flopro is supposed to be here tomorrow. In preparing for installation, i realized that when i cut the pipe to remove the Whisperflow i will have to replace the part of the inlet pipe that contains a hose spigot as there is not enough room to glue in a coupler. I have never used this...