Recent content by EskimoPie

I add about a half gallon a week (although I can only get the half strength stuff around here).

No, I have not completely solved my issues. What i did is take some bulk ethernet cable and made a very long cable for the transducer. I then tried moving the transducer around the yard to various points and then trying to use the remote at various locations. I am quite confident the issue is...

4. No new appliances that I can think of. 5. I did get a new router, but I've tried pulling the plug on it and then testing the easytouch remote and it had no effect. I actually have a couple of baby monitors also (that I've had for the duration of the pool and never caused any problems...

1. Yes, I've replaced the batteries several times since then in the remote. 2. Yes, I've tried re-addressing the units several times. It always says it works (channel found), but doesn't improve the reception. 3. If I recall correctly, there are two LED's on the board, one would blink slow...

Here are a couple of pictures of the installation and the damage. The first picture shows how they re-plumbed it after I told them it was flowing backwards. The cold water flows up to the roof in the pipe on the uphill side and then goes over the top of the other pipe and across the entire...

Ugh... so nobody else with an easytouch remote has had this difficulty I take it? I was going to play around this weekend with 100 feet of ethernet cable and try my remote out with the transceiver at different locations. Unfortunately the weather was just too Dang beautiful and I ended up just...

Hey all, I have a Pentair EasyTouch system with an 8 channel wireless remote. For almost 3 years now the remote has worked great. Never had any troubles with it. Now for the last 6 months or so, I'm having serious connection troubles. 99% of the time now the remote will just say "No...

Yes, that makes more sense.

Beep, I'm not sure where you read those things but all of your reasons seem to be mis-informed. I have a Pentair SWG and in the 3 years I've owned the pool, I've given it maintenance only 2-3 times... and that involved simply unscrewing the couplers, and cleaning the plates by letting it soak...

Well, that's how they originally had it plumbed, but the same summer the pool was built (3 years ago) I had them switch it to fill from the bottom. I'm definitely going to crawl back up there and take some pictures though and make sure I'm correct on which way the water is flowing. I'm...

Hey all, been a LONG time since I've posted, please forgive me. I'm in Tucson, AZ and recently we had some record low temperatures. Low temps for a couple nights in a row got down to about 18 degrees. Luckily my freeze protection in my automation system (easytouch) protected the main...