Recent content by Ebburns

  1. E

    Salt high or low??

    Just did another test just to further verify the K-1766 5ml of tap water (which has 200 or less ppm of salt measured that separately prior) mixed with 5ml of pool water and read 2600ppm salt. So I'm going to put money on the correct reading from the test. Used backwash then rinsed and dropped...
  2. E

    Salt high or low??

    Okay here goes... Salt test kit (k-1766) says my Salt is at 5000. However, my SWG has the low Salt indicator on. I'm not sure which to believe. Prior to this new issue all was happy happy happy and I had one of plastic lines disconnect from the pool 3 times draining the pool below the skimmer...
  3. E

    Questions on Switching Over

    Yes I use the pool math but I use the website. I'll get the app going this week. I love it so much! It is my saving grace lol. FC - 5ish this morning (used the less accurate reader in the little blue box this morning) CC - less that .5 PH - appears to be at 7.2 TA - haven't tested yet since...
  4. E

    Questions on Switching Over

    Okay I'm a Newb on this... so here goes. Hopefully my signature is updated properly. Approximately 4300ish gallons Summer Waves (14×48 round). Bought my salt (3-40# bags) from "start up chart" in SWG manual. I'm placing an order for the K-1766 and a couple other regents from my TF-100 that are...
  5. E

    One leg starting to come off of paver!

    No that's weird. That was last years easy set 10ft pool we had. We changed to a 14×48 round which states 4625 gallons. I thought I changed my signature though. It further states they are only filled (metal frame pools) to 90% capacity which puts me at 4162ish... I guess.
  6. E

    One leg starting to come off of paver!

    Sorry Sorry I'm slow. But I thought the clay was best because that what I was supposed to put the pool on anyway (compacted soil). Which I thought was sometimes clay. Mostly with the depth that I'm at anyway. So what I went with was the same width paver I found but 3.5 inches longer and drained...
  7. E

    One leg starting to come off of paver!

    I'm confused?
  8. E

    One leg starting to come off of paver!

    You don't think the pool sitting on top of a 1st paver is a even worse idea though? That's what I'm afraid of. I had also thought of partial drain prior so I could add clay easier. I also had the idea of buying a few larger pavers as mine are 7x7. I should have from the beginning but because our...
  9. E

    One leg starting to come off of paver!

    I still not sure of the best option to do? Partial drain and try to move both pavers out and slide some clay under that void best we can or put a 2nd paver behind. What do you think is the best choice?
  10. E

    One leg starting to come off of paver!

    I am in Ohio... and that is actually one of my questions is can I winterize it? It's just liner hanging over the metal (somewhat coated frame I guess). The manual says if temp gets below freezing to drain, but what do you experts say? Will ice punching the liner? Is that the concern? Or is it...
  11. E

    One leg starting to come off of paver!

    Yes it's round. On the low side of full. Yes, I'm very concerned with the rub as well. I kind of did something that might be good or bad in our set up that might save a bit on the front edge of the paver... but I sliced a cheaper pool noodle in half a used the half circle (moon shape) to buffer...
  12. E

    One leg starting to come off of paver!

    Guys please help! One leg is started to come off my paver. It was suggested to place another paver behind and try to "cushion" this one somehow. What do you guys think of that idea?? I DON'T want to drain please.... My 2nd leg that is in question is at the very edge is on the side that had to...
  13. 20210709_135120.jpg

    20210709_135120.jpg

  14. 20210709_133635.jpg

    20210709_133635.jpg