Recent content by dbdubb28

  1. dbdubb28

    First run in with Algae since pool build!

    One more question, I’m planning to start the slam tonight and I read the recommendation of running the pump 24x7 throughout the process. I have a two speed pump, should I run on high or low for the duration?
  2. dbdubb28

    First run in with Algae since pool build!

    Our steps are a bit cumbersome and large. Before I start the slam, would it be sufficient if I jump in, unhook them from my deck, scrub them while in the water and simply leave them in the middle of the pool during the slam process?
  3. dbdubb28

    First run in with Algae since pool build!

    Thanks for the advice. Our stairs were incorporated into our deck build and are a bit more tricky to remove then your average set of stairs. They are about 3 ft away from my return. If I adjust my return to be more in their direction, will that help? This would create a counter clockwise...
  4. dbdubb28

    First run in with Algae since pool build!

    Understood. I’ll make some adjustments once I get back to normal.
  5. dbdubb28

    First run in with Algae since pool build!

    I went ahead and turned it on to max. I don’t really understand how I got here, which makes me want to learn. I’ve been testing my numbers regularly. Only thing different was the tropical storm we had off our east coast. It blew some decent wind this weekend and I assumed it was just pollen from...
  6. dbdubb28

    First run in with Algae since pool build!

    So I measured a FC of 4.0 tonight with 0 CC. According to the chart, my SLAM number is FC 24 since my CYA is at 60. Should I even bother running the SWCG at max tonight? I can run to the store tomorrow to pick up the chlorine to get it started. Thanks Again.
  7. dbdubb28

    First run in with Algae since pool build!

    Ok thanks. I'll study up on the slam process and get to work on it tomorrow.
  8. dbdubb28

    First run in with Algae since pool build!

    So I noticed over the weekend a little pollen or algae on the bottom of the pool. After running our Dolphin CC a few times, I thought it would clear it up. Before leaving town on Monday, I jumped on here and was reading about how others have needed the "extra fine" filter basket for the dolphin...
  9. dbdubb28

    Return Jet - Thread fitting size?

    I am happy to report that this was operator error. Do not try to test fitting sizes when the pump in running on low. After I turned the pump off, I was able to confirm that 1-1/2" is the correct threaded fitting. :) Now on to my next post about my first episode with algae.... Thanks all!
  10. dbdubb28

    Return Jet - Thread fitting size?

    Good stuff all! Thanks for the help. It’s been a busy week so I haven’t had a chance to get back to this project. I appreciate all of your help!
  11. dbdubb28

    Return Jet - Thread fitting size?

    I was under the deck today for an unrelated project and thought I'd shoot a quick picture of the return from the outside to see if anyone could tell if it's a standard return or not.
  12. dbdubb28

    Return Jet - Thread fitting size?

    lol Wow!! That thing looks like a lot of fun! I appreciate the good advice. I'm going to take that fitting up to my local plumbers shop and see what they have. If a 1.6" PVC connection was available, that's what it feels like to me. It's silly, I know. I'll double check it all again before I...
  13. dbdubb28

    Return Jet - Thread fitting size?

    So I did some reading on this forum and came across Skippy's pool cooler and decided I wanted to take this on. I went as far as ordering the same Polaris fittings that he used (I later found out that this was because his pool had a specific polaris return jet that these fittings were designed to...
  14. dbdubb28

    Above ground pool vacuum recommendations:

    Yes it goes up the walls. Well I've only had it for a few months now and haven't had issues with it. It has really good reviews and in the listing they describe it as "ideal for above ground". Not sure exactly who you spoke with but I would think that if that was the case, they certainly...
  15. dbdubb28

    First Pool - Many Questions

    I don't see any issues here, but I'm far from an expert. If it's all resin, you should be good with a salt system. When I purchased our 2 speed pump, it came with a recommended range of salt PPM that would be ok. Maybe just double check that on your pump side...