Recent content by daltongang

I had an old 2003 style jandy board along with the all touch in house controller. The board did the trick all of these years but finally died. I decided to get/install the iAqualink 2.0 with the app etc. Got it all in and things seem to work ok but had some funny issues I can't figure out. I'm...

I did return and got another and now it works fine.

My old jandy board died on me. The transformer from 2004 also died but I discovered a fuse blew on it just today. I bought a new transformer and the iaqualink upgrade kit. The board wouldn't fire up. After testing the transformer I see it has 24vac coming off the 2 yellow wires to the board. But...

I think I will just upgrade to the aqualink 2.0 upgrade kit. After seeing some videos its light years ahead of my my wired wall controller. For $800 it seems like a decent deal and pretty simple to install. I found my heater parts to fix the rattle and thermostat for under $100 so I'm going to...

ok, I added a signature with as much as I know for now. I believe the heater is exactly like the one shown in the video I posted above. It looks identical. (Hayward H350IDL2)

I do have the All-Button panel. This is what my system looks like (this isn't my picture but looks very close to this) https://s3.amazonaws.com/f01.justanswer.com/JACUSTOMERhxqkkid0/2012-04-06_161009_img_45941.jpg Not sure what you mean "load center" but my box does have 3 circuit breakers and...

First let me say I hired the local pool company and they came out once and despite my texts/calls he never came back. He had other more important jobs I guess so now I am learning to do this on my own (maybe). I've done all my own pool stuff over the past 15 years. ok, its the jandy aqualink Rs4...

A side story as to why I decided to do this myself. When my pump went out last week I had a pool guy come out and diagnose it. I said I wanted a 2 speed 2 HP pump and he made some calls and said they don't exist any longer. He wanted me to get a different one at that point which would be around...

ok, I made the change and it works now. I guess I assumed L1 and L2 were low and High. I think its weird how L = A but whatever. If hayward would've included some type of wire diagram then I wouldn't have went through this but their manual doesn't mention any of this and I've read it three...

Thats what the relay is for. I have buttons inside my house on the controller. Low speed & High speed. So the switch is already wired and when I push the button you can hear the relay 'click'. And again, I am just replacing a pump with a new pump. I didn't add anything different other than...

So my pool is about 10 years old & has a large spa also with a waterfall. All Hayward equipment. They installed 2 (1 speed) pumps back then & each was 2 HP. 1 for waterfall, one for the pool/spa. I have an in-house wall controller by the way. The pool/spa pump went bad after 5 years and a pool...