C
Latest activity Postings Media About
-
-
Cczb182 replied to the thread tf100 cya test help.I figured I would give another go at raising stabilizer to 70, so added another 2lb(20ppm). Tested at got maybe 60ppm. I’ve added...
-
Cczb182 replied to the thread TA higher after borates added.Thanks, video was nice. I added 10 ppm of cya recently, maybe after last TA test, so with this together i can see different value now...
-
CI opened pool at 100 TA, it has lowered to 80 since due to acid. I added borates 50 ppm week or two ago, now I am reading 100 ppm...
-
Cczb182 replied to the thread Jandy temperature sensors not accurate.I measured early morning and heater showed correct temp, aqualink was one degree high and aquapure was two degrees high. As day goes...
-
Cczb182 replied to the thread Jandy temperature sensors not accurate.
-
-
Cczb182 replied to the thread Just some Memorial Day messing around- RPM vs. GPM vs wattage.Here is mine. Also straight line. Right line is pool mode with spillover. Left line is spa mode. My 3 year old drew on it some : )...
-
-
CNew pool. All Jandy , have 5 ways of measuring temperature 1. Manually with probe 2. Aquapure sensor 3. Heater sensor 4. External...
-
CMonitor your FC to get an idea if you are gaining ground on your daily FC loss. No need to rush raising your CYA now rather monitor...
-
Cczb182 replied to the thread tf100 cya test help.I added 1.5lb (15ppm) and i can just barely see black at 60, so it seems to raised cya level accordingly. I've added 7.5lbs now, so I...
-
Cczb182 replied to the thread tf100 cya test help.I think I will try adding another 15 ppm, see if it registers. I’m wondering if it’s possible cya reacts with something in pool that...
-
Cczb182 replied to the thread tf100 cya test help.Regal
-
Loading…
-
Loading…
-
Loading…
