bhubb's latest activity

  • B
    bhubb replied to the thread Fc will not go up.
    Water cleared up overnight. Fc down to 3 so back to 24. Tested cya again to verify and am not getting any.. very odd bc I added 10lbs...
  • B
    bhubb replied to the thread Fc will not go up.
    Ok good to know. Also cc is .5
  • B
    bhubb replied to the thread Fc will not go up.
    I have it but never used it. I think I am slightly colorblind and it is hard for me to tell color matching tests.. wife and I see 2...
  • B
    bhubb replied to the thread Fc will not go up.
    Ok I added way more to get over hump and added 8 bottles based off my made up math and am at 25 now so I guess I will see what it is in...
  • B
    bhubb replied to the thread Fc will not go up.
    Yes I tested my cya 3 days ago. My swg was not generating after I installed pump. They said it was phosphates or dirty cell. I...
  • B
    Hello everyone - I installed a pentair vsf and a new pentair tr100 sand filter and while everything was down for the 3 unexpected days...
  • B
    bhubb replied to the thread Discharge leak on threads new pump.
    unfortunately I had everything removed and every single pool store was out of them and pentair told me a standard male adapter works...
  • B
    bhubb replied to the thread Discharge leak on threads new pump.
    I have oatey great white. I assume that is type of sealant you are talking about? Was not sure if that was ok to use with motor...
  • B
    Installed new intelliflo and got small leak at the discharge thread. I used magic lube red on thread and hand tightened and it bottomed...
    • F0161FAB-5640-4CBE-8934-B9EABD261B39.jpeg
  • B
    I plumbed in a new vsp and filter as well as new jandy valves. When I installed the jandy valve that connects to the pump via a union I...
    • 9DFEE5A3-8DFF-4953-96BC-DFF9D2CC1D22.jpeg
    • 96F5487A-64A0-46CB-AFF6-769D57BE7FAA.jpeg
  • B
    bhubb replied to the thread Abs transition to pvc.
    Also it could be black poly pipe I am told but still need barb fittings but not sure how to tell if abs or black poly?
  • B
    Hello - I am redoing my pool pad with new equipment and plumbing. While I am doing that I am upgrading to 2” pipe. I under stand you...
    • 3A5C8F23-3099-4FCD-9156-E3135FE38B7E.png