Recent content by Benlsargent

  1. B

    Can someone run a SWCG system in parallel?

    As requested I have a Jandy Aqualink RS controlling the Jandy SWG PLC1400 When I do add a second SWG I think I would install a 60k gallon unit.
  2. B

    Can someone run a SWCG system in parallel?

    I liked the write up about parallel systems as preferable. Something I could consider tackling this winter. I ended up with mustard algae and black algae this year though I caught early and tackled the issues. Just believe the issue was FC dropping too low during peak season.
  3. 5C2C7E98-E4D1-4E90-BE29-B9BEB6297A38.jpeg

    5C2C7E98-E4D1-4E90-BE29-B9BEB6297A38.jpeg

  4. D0572AAD-E4EF-411C-8C9E-BD99C68433D2.jpeg

    D0572AAD-E4EF-411C-8C9E-BD99C68433D2.jpeg

  5. 913FA8D3-B20D-4123-9A2B-FA6100CBB273.jpeg

    913FA8D3-B20D-4123-9A2B-FA6100CBB273.jpeg

  6. B

    Can someone run a SWCG system in parallel?

    43k pool Jandy PLC1400 swg 1.5 hp Jandy stealth pump 1.5 inch return line CYA 60 Run time for pump 24hrs a day zone 8 East Texas My FC runs between 1 and 3 and have had some algae issues this year so was wondering if I could add a second SWG system parallel to my existing swg to get enough...
  7. B

    SWG, Ph, TA, and Aeration

    Just an update for summer load and chlorine production. My Jandy 1400 has not kept up this summer and I have had some algae and even some black algae. Both algae are gone after slam though I may have some issues with my salt water sensor. The sensor will calibrate but may not be holding the...
  8. B

    Mustard algae

    Came back from a trip and had 4 inch rain and a spike in temp. Pool stats after rain SWG Janet 1400 43k pool Cartridge filter Chemical check today FC 0 TC 0 Cya 18 Salt conc 2600 Ph 7.8 Alkalinity 120 Added 240 lbs salt And a 10 percent liquid chlorine After I shock and get the cya level...
  9. B

    Chlorine tablet ingredients

    A chlorine tablet advertised as 97% thichor is that going to have negligible CYA the ingredients don’t describe the the inerts.
  10. B

    Jandy check valve on main pump discharge going to spa and to circ jets

    What would be the plan for that line I would assume it should stay for pool mode and is automated maybe u r thinking I could automate so no waterfall which I could but I want three options Spa Waterfall and no waterfall
  11. B

    Jandy check valve on main pump discharge going to spa and to circ jets

    I do have a drain suction line for the spa that isolates the spa during spa mode but is shut during pool mode
  12. B

    Jandy check valve on main pump discharge going to spa and to circ jets

    Many thanks for this forum so much info and fun to participate!