Recent content by armyofda12mnkeys

  1. A

    Replacing pool light... right light and also do I need silicon?

    Hey all, have an old light I'm replacing the light on for my parents. Its says its a CHD model 100-5 500Watt 120V (its an old swimming pool maybe from the 60s or 70s, seems like this housing is an older one). I'm guessing this is the part diagram for it...
  2. A

    Glue broken pool jet back onto return valve while water is above it

    I tried the Mr Stickies Underwater Glue 1st and it worked. I applied some on the jet and also around the edges and put on my goggles and put the jet in place (then took a screwdriver with more glue and placed it around the jet on the outside while it was in-place underwater). I had to use a flat...
  3. A

    Glue broken pool jet back onto return valve while water is above it

    Thanks... The JB WaterWeld epoxy seems to be similar to the LocTite marine epoxy. I already ordered the former the other night... so i'll give that a shot first and report back if it works. Do I want to be underwater applying this epoxy stuff with my goggles on to get it fully on hehe? It...
  4. A

    Glue broken pool jet back onto return valve while water is above it

    hmmm i need a $45 minimum to order from that website. Don't think I see that product elsewhere. Any other good choices that I can get from Amazon? Mr Stickies underwater glue (ST-02) or JB Weld WaterWeld Epoxy Putty Stick (8277)?
  5. A

    Glue broken pool jet back onto return valve while water is above it

    Hey all, 1st post here... Thought I'd post and help out my parents for things they don't how to fix :). So one of our pool jets (on the return valve) broke off and we haven't attached it for a couple years since my parents don't lower the water in the winter below it. There are 2 return jets...
  6. 20200630_175114.jpg

    20200630_175114.jpg

  7. 20200630_175109.jpg

    20200630_175109.jpg

  8. 20200630_175058.jpg

    20200630_175058.jpg