Latest activity Postings Media About
-
-
aquamike replied to the thread First time SLAM. Can I do it with CYA 28?.FC 1ppm pH 7.5 TA 130 CH 175 CYA 0 (no reading) -
aquamike replied to the thread First time SLAM. Can I do it with CYA 28?.The TF test kit arrived yesterday. Did my first round of tests this morning. CL had gone down after I went a day without adding...
-
aquamike reacted to V___25's post in the thread First time SLAM. Can I do it with CYA 28? with
Like.
A little late to the party but also make sure you are brushing and vacuuming too. If you have a robot, run that. If that ladder comes... -
aquamike replied to the thread First time SLAM. Can I do it with CYA 28?.Clearing up nicely! I'm going to try to keep it at TC 5ppm until the TF test kit arrives.
-
We're going to need a bigger boat. :shark:
-
aquamike reacted to jeffchap's post in the thread First time SLAM. Can I do it with CYA 28? with Like.
Keep at it - the system works. We just have to knock the algae down faster than it can multiply. Your FAS-DPD test will provide a lot...
-
aquamike replied to the thread First time SLAM. Can I do it with CYA 28?.After adding what seems like a staggering amount of chlorine, I finally got there this evening. TC 5ppm. :p (Hope my cheapo test kits...
-
aquamike replied to the thread First time SLAM. Can I do it with CYA 28?.Jug #5 added after sunset. Still only seeing 1 - 2ppm. Nothing seems to be moving the needle. :(
-
aquamike replied to the thread First time SLAM. Can I do it with CYA 28?.Added jug #4 20 minutes ago and I think I'm up to 2ppm. Hard to distinguish between 1 and 2ppm on the test gauge.
-
aquamike replied to the thread First time SLAM. Can I do it with CYA 28?.I've been measuring about 1 - 2 hours after adding a jug. I wasn't sure how long to wait. Figured it would need time to circulate...
-
aquamike replied to the thread First time SLAM. Can I do it with CYA 28?.Wow, I've added 3 gallons of liquid chlorine over the course of 4 hours and TC is only about 1ppm. Very sunny right now though. Is the...
-
aquamike replied to the thread First time SLAM. Can I do it with CYA 28?.The 28ppm of CYA was measured by my pool store's test equipment. Not sure of the methodology, but they are a BioGuard dealer. Using a...
-
aquamike posted the thread First time SLAM. Can I do it with CYA 28? in Algae - Prevention and Treatment.I am going to SLAM my pool for the first time. The water is cloudy after my pump incident. Not green yet, but cloudy enough that I can't...
-
-
-
aquamike replied to the thread Pump is noisy and shuts off after a minute.Thanks to everyone for the advice! I was lucky enough to be able to get a technician out here yesterday. I started up the pump for him...
-
-
Loading…
-
Loading…
-
Loading…
