Latest activity Postings Media About
-
-
Alexr54 replied to the thread Polaris 9650IQ - Another error 10.If I ever get a new unit like this the first thing I’m doing is opening it up and putting in that water sensor. -
Alexr54 replied to the thread Polaris 9650IQ - Another error 10.After some more testing, i found one motor went bad as well as the motor circuit board. This all started from a small leak that sprung...
-
Alexr54 replied to the thread Polaris 9650IQ - Another error 10.Ebay Definitely not new. New to me. And better then my obviously burnt circuit board. It seems to have made some progress, now lift...
-
Alexr54 replied to the thread Polaris 9650IQ - Another error 10.Soldering on a new capacitor did not fix it. Looks like possibly more was burnt besides the capacitor. The original circuit board would...
-
Alexr54 replied to the thread Polaris 9650IQ - Another error 10.Eventually I ended up taking off the motor housing. And it was not completely dry inside. The circuit board had a fried capacitor. Most...
-
Alexr54 replied to the thread Polaris 9650IQ - Another error 10.I did this and unfortunately it didn't solve the issue. A couple fasters were kind of loose in the plug so was hoping that did it by...
-
Alexr54 replied to the thread Polaris 9650IQ - Another error 10.Thanks. I did check continuity and was fine when I checked. But maybe it’s intermittent because of a loose connection. If it’s just a...
-
Alexr54 replied to the thread Polaris 9650IQ - Another error 10.Thank you for this! I’ll be checking that today. And will update here soon as I can.
-
I solved my last error 10 on my polaris robot (basically same one as yours) as per the loose wire fix shown about two minutes into this...
-
Alexr54 replied to the thread Am joining the Polaris er 10 team!.Which elbow? At the cleaner or the brain?
-
It's no more than 4 years old. Based on searches i have done, that seems to be the threshold for this dreaded error 10. From my...
-
-
Loading…
-
Loading…
-
Loading…
