Latest activity Postings Media Albums About
-
-
Jimrahbe replied to the thread 3 position actuator for pump running two water features?.Herman, The OP has a Pool and Spa IntelliCenter, which comes with 4 valve drivers.. Intake, Return, Valve A and Valve B. I 'assume'... -
Jimrahbe replied to the thread After pool opening, the filter is leaking around the seam when the pool is spill over mode.C, You either did not tighten the band enough or you need a new O-Ring.. Show us a pic of the band fastener.. Thanks, Jim R.
-
I didn't put it together. If i was the one in charge i would use 1 cl580 cartridge filter.
-
Jimrahbe replied to the thread Feedback on Pentair Intelliflo3 VSF.Dan, You can replumb the pad, if it makes it easier to install the pump, but changing the whole pad to 2" will not make any operational...
-
Jimrahbe replied to the thread Maytronic active 20 power supply overheating?.m, I doubt it is a heat related power supply issue. I suspect it is more a bad button issue on the power supply. Where did you buy...
-
Jimrahbe replied to the thread 3 position actuator for pump running two water features?.Utah, Pretty simple fix.. Remove the single 3-way valve/actuator you have now, and replace it with a 2-way valve/actuator on each of...
-
Jimrahbe replied to the thread Feedback on Pentair Intelliflo3 VSF.Dan, The whole point of owning a VS pump is to run a slow as you can and still get the job done.. Plumbing size really has nothing to...
-
Jimrahbe replied to the thread Feedback on Pentair Intelliflo3 VSF.Dan, While the IntelliFlo3 is a great pump, I never recommend buying a small (1.5 HP) VS pump. The larger (3 HP) VS pumps will move...
-
Jimrahbe replied to the thread Robotic cleaner.me, See this Review...
-
Jimrahbe replied to the thread Does this make sense?.Justin, Why do you think you need two filters?? Thanks, Jim R.
-
Jimrahbe reacted to Newdude's post in the thread Nautilus CC owners, can you describe how your robot navigates? with
Like.
Nobody likes being watched by an impatient customer. Let the lil guy work in peace. -
Jimrahbe replied to the thread Skimmer/drain Settings.John, I would shut the main drain off or at least almost off... This will make your skimmers work a little better. Turn the handle of...
-
Jimrahbe replied to the thread Nautilus CC owners, can you describe how your robot navigates?.Allan, For your own sanity, I suggest that you not watch it run... Somehow.. it knows when you are watching.. :mrgreen: I only...
-
Jimrahbe replied to the thread Nautilus CC owners, can you describe how your robot navigates?.Allan, It is not designed to go all the way up the wall on each pass... I am not sure of the exact ratio, but my guess is that it goes...
-
Jimrahbe replied to the thread I’m new to this and I was wondering about what controls the strength of the skimmer suction? Can anyone answer this question please?.Harvey, Patience is your friend when it comes to skimmer operation. :mrgreen: Skimmers are not designed to reach out into the pool...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…