Latest activity Postings Media Albums About
-
-
Jimrahbe reacted to Rancho Cost-a-Lotta's post in the thread Just moved in, pool beginner with
Like.
Keep in mind that the pH test is not valid when FC level is over 10 ppm. Do you have the ability to drain off some water and refill... -
Jimrahbe replied to the thread Featured Skimmer not working as well as I would like.Red, Your main problem is not the lack of an IFCS, but rather the way your pool is plumbed, and having too small of a pump. I agree...
-
Jimrahbe replied to the thread Just moved in, pool beginner.Jon, With a CYA of 90 your target FC is 10 to 12 ppm. Your FC is just slightly high, and that is much better than too low. Swimming...
-
Jimrahbe replied to the thread Is my IC40 Still Working?.I doubt it.. Looks like you are doing just fine. I run 24/7 at 1200 RPM for less than $20 bucks a month.. Jim R.
-
Jimrahbe replied to the thread Question on Valve Actuators and Spillover from Spa w/ Easy Touch Automation.Like Marty says.. The Circuit Function must be set to "Spillway".. Circuit Names, by themselves do not mean anything.. Thanks, Jim R.
-
Jimrahbe reacted to mknauss's post in the thread Question on Valve Actuators and Spillover from Spa w/ Easy Touch Automation with Like.
To confirm, for Feature 1 you selected the Circuit Function Spillway. This can be done on the SLConfig app.
-
Jimrahbe replied to the thread Is the Pentair Easy Touch remote obsolete?.Jeff, Try these guys.. https://www.polytecpools.com/EasyTouch-Accessories_c_218.html Log-in to see pricing... Thanks, Jim R.
-
Jimrahbe reacted to maggiesfan's post in the thread New EVO 614i Robot Pool Cleaner Review with Like.
I ordered this one from marina pool and spa Polaris R0897800 Fine Filter Canister and it does a great job of getting the fine dust and...
-
Jimrahbe replied to the thread Question on Valve Actuators and Spillover from Spa w/ Easy Touch Automation.23, I am not sure I fully understand what you are saying.. :scratch: It appears to me that you have a pretty standard set up for...
-
Jimrahbe replied to the thread IntelliChlor questions.rjb, Even though the cell should shut off at 52 degrees, it will start to have issues when the water temp gets below about 60 degrees...
-
Jimrahbe replied to the thread Is my IC40 Still Working?.K, No, the output of the cell is constant.. When you set the output% to say 50%, that just means the cell only runs half the time...
-
Jimrahbe replied to the thread Sta Rite intellipro VSF 3hp.Gus, Allen meant to say you can never go too big with a VS pump.. You just adjust the speed to match your pool and what you want to...
-
Jimrahbe replied to the thread Is my IC40 Still Working?.K, The Cell light comes on when the cell is making chlorine.. If you set the output to 50% the Cell light should be on for about 2.5...
-
I have used the Puritech stuff, and the RX Clear in the past. Both seemed to raise my CYA but the CYA seemed to disappear very quickly...
-
Jimrahbe replied to the thread Tracking my incredible shrinking CYA.Kato, I just bought some CYA from Doheny... I too felt that my cheap CYA was not lasting as long as it should.. But, have no data...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…