Latest activity Postings Media Albums About
-
-
Texas Splash replied to the thread Air getting in filter after pump turns off.Depending on your model filter, basically yes, you could try that. If you notice an improvement, then it's probably a sign the air... -
Texas Splash replied to the thread Air getting in filter after pump turns off.Not necessarily. You can have a very tiny air leak coming "IN" with no obvious water spouting outwards.
-
Texas Splash replied to the thread Quick Slam Question.Yes, pH first. But be sure you have a good CYA of 30 and no lower. With a CYA of 30, then your SLAM FC level will be 12 and you can...
-
Texas Splash replied to the thread Air getting in filter after pump turns off.What about your air relief valve on the filter? That's a common place as well.
-
Texas Splash reacted to Jontmiller's post in the thread Jandy AquaPure 1400 transformer/board testing failure modes with
Like.
Bump for any more views...Any help testing the board or sourcing a new one? Photo for clicks -
Texas Splash replied to the thread Ants in the pool?.This is normal and is not a reflection of anything wrong with your chemistry. It's a seasonal thing and happens to us in Texas once or...
-
Texas Splash reacted to snyamathi's post in the thread Suction / Gurgling noise from filter, some bubbles into pool with Like.
Thank you for the response and that link - lots of very helpful info in there and a few steps I can take for self-diagnosis. I'll see...
-
Texas Splash replied to the thread Fiberglass Discoloration (Faded & Chalky) - My Story.I'm afraid there are no optimistic updates or changes. Our shell remains chalky below the waterline and any attempts to remove it...
-
Texas Splash replied to the thread Weird Priming Issue.
-
Wanted to update this thread because I have resolved my issue. I started to suspect towards the end of last season that the issue was...
-
Texas Splash replied to the thread Trying to SLAM a salt water pool.You can test the CYA at any time. The FC level won't bother it.
-
Texas Splash replied to the thread Trying to SLAM a salt water pool.Since you have an AGP, if you choose to hang the sock over the edge of the pool to get soggy, just don't let it rest against the liner...
-
Texas Splash replied to the thread Trying to SLAM a salt water pool.We often times fill a white tube sock or similar item with granular stabilizer. Place the sock somewhere in the pool where it can soak...
-
Texas Splash replied to the thread 2nd Year Pool Owner.Welcome! :wave:
-
Texas Splash replied to the thread Trying to SLAM a salt water pool.Welcome! :wave: I would tend to agree with Jim. If your "swamp" is that bad, a total (or very large) drain to exchange water may be...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…