Latest activity Postings Media Albums About
-
-
mknauss replied to the thread TFPC Recommended level vs manufacturer level.Old, very old, fiberglass shells had calcium in them. Do what makes you happy. I just point out chemistry. -
mknauss replied to the thread TFPC Recommended level vs manufacturer level.Not the CH unless in the very high range. Salt gives the pool water a silky feel.
-
mknauss replied to the thread Bookmarks?.On a mobile device, touch the hamburger menu upper left. Select the little person icon. The the page icon (far right). On a pc, click...
-
mknauss replied to the thread Acid wash or re-surface.https://www.troublefreepool.com/wiki/index.php?title=Algaecide#How_To_Use_Polyquat_60_in_Ascorbic_Acid_Treatments I would follow the...
-
mknauss replied to the thread Acid wash or re-surface.If you are going to delay I would get some poly60 in the water for insurance. pH is fine. The AA will drop it more. But for short...
-
mknauss reacted to jthall's post in the thread Air in system - does pentair valve need repair / maintenance? with
Like.
Solved: replacing o rings fixed the issue. No air at all - high or low speeds. Found another dripping on return to pool side, so... -
mknauss replied to the thread Calcium Hardness-Where does it come from?.Evaporation. The calcium stays in the pool water. You add more water (every day in summer) with calcium. It builds. You have very low...
-
mknauss replied to the thread Testing pool for the first time using legit TFT 100 pro— thoughts on what to do next.Not enough to get to 30. And using a part bottle of that stuff normally gives you less than you expect. Dump the rest in and clean out...
-
mknauss replied to the thread Raise ph before SLAM?.Your TA of 110 will not allow your pH to stay at 7 for long. Start the
-
mknauss replied to the thread TFPC Recommended level vs manufacturer level.A heat pump is not effected by low CH. Neither is your paver stone (not in contact with the pool water). You do not need to add any...
-
mknauss replied to the thread New small pool, Ph reality check please.https://www.troublefreepool.com/wiki/index.php?title=Copper_in_Pool_Water...
-
mknauss replied to the thread Testing pool for the first time using legit TFT 100 pro— thoughts on what to do next.Do not commiserate over whether the pH is 7.5 or 7.8. Only real concern is if it is 8 or above, so violet/purple tones. Or below 7, or...
-
mknauss replied to the thread Hello from London, UK.Welcome to the forum! I suggest you read through Pool Care Basics - Trouble Free Pool and even look at a few of our videos TFP-TV -...
-
mknauss replied to the thread Raise ph before SLAM?.If the pool holds FC more than 30 minutes, you do not have ammonia. Raise the CYA to 30 ppm and start the SLAM process, as necessary.
-
mknauss replied to the thread How long does PH rise more frequently with a newer plaster pool?.Your pool plaster is still curing. You also are adding high TA fill water due to evaporation. Both of those push pH higher. You will...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…