Latest activity Postings About
-
-
OonBalance replied to the thread Filling pool after replaster, high water table.The pool shell hasn't shifted or raised so far, so that's good. I hope that removing two feet of water doesn't have any negative effect...
-
OonBalance replied to the thread Yellowing on new plaster.I am thinking that the yellow areas are from some calcium build up due to the plaster "dust" hardening in those areas that didn't get...
-
OonBalance replied to the thread Filling pool after replaster, high water table.The seriousness of the high water table problem would cause me to strongly consider waiting for the water table to go down. And the...
-
OThat's good news. Hope everything will get sorted in the end 🤞
-
OUpdate: Took a while, but I finally got the PB company to come out and look at the plaster issue in the spa. The owner acknowledges...
-
OonBalance reacted to AQUA~HOLICS's post in the thread **Inactive*** Rebar rust and prep for StoneScapes Mini with
Like.
My opinion from the seeing these photos is that you need to have an actual expert in this type of fied as to what is causing the current... -
OonBalance reacted to ajw22's post in the thread **Inactive*** Rebar rust and prep for StoneScapes Mini with Like.
Your pictures give no context as to the size and position of what is shown. Show us some overall pictures of the pool and identify...
-
OonBalance reacted to Newdude's post in the thread Newb OB with BYOP in Buckeye AZ - tuning the SWG with Haha.
7.85 and 7.479
-
OonBalance replied to the thread 04 April 2024 Update - More Equipment, First Pass Raspberry PI, Piping.With your TA and CH at those levels, once the pH reaches 8.0, I would start adding acid to keep the pH below 8.0 but also above 7.6. And...
-
OonBalance replied to the thread Bicarb Startup Question.Sounds like a good plan for checking the water volume. Glad to see that the plaster guy will remove the plaster cream and not water...
-
OonBalance replied to the thread Bicarb Startup Question.I prefer that no water rinsing be performed. For the accurate volume, make sure you subtract the step areas and curved walls.
-
OonBalance reacted to bdavis466's post in the thread 04 April 2024 Update - More Equipment, First Pass Raspberry PI, Piping with Like.
CO2 doesn’t lower TA and your fill water is high which means you’ll going through a lot of gas. Is this for safety reasons or???
-
OonBalance reacted to bdavis466's post in the thread 04 April 2024 Update - More Equipment, First Pass Raspberry PI, Piping with Like.
I would imagine chasing the TA from refilling would still require acid and if you’re already using acid, what’s the benefit of using...
-
OonBalance reacted to setsailsoon's post in the thread 04 April 2024 Update - More Equipment, First Pass Raspberry PI, Piping with Haha.
I would go for this but Robin would dig every single one of them out and I'd be left with an ugly finish...
-
OonBalance replied to the thread 04 April 2024 Update - More Equipment, First Pass Raspberry PI, Piping.If the pH isn't already 8.0 (which is okay) by the time the pool is full, just add small amounts of acid occasionally to keep the pH...
-
-
Loading…
-
Loading…