Latest activity Postings Media About
-
-
mas985 replied to the thread Traditional air venturi vs blower for spa.I have a grate across the end of the pipe. That prevents critters from getting in and plugging the pipe. Not so worried about the... -
mas985 replied to the thread Traditional air venturi vs blower for spa.Again, you don't actually need a blower if the air line is designed properly and the flow rate to the jets is sufficient. I have a 6 jet...
-
mas985 replied to the thread Traditional air venturi vs blower for spa.When you reduce the orifice size, the required flow rate is reduced as well to maintain the venturi effect. However, the strength and/or...
-
mas985 replied to the thread Traditional air venturi vs blower for spa.I had assumed you were using individual jets like this: OR are you using jet manifolds like this: This clusters 3 jets for an...
-
-
-
-
mas985 replied to the thread Traditional air venturi vs blower for spa.The only ones I have seen for spa side are the small diameter that sit right above each of the venturi jets. That way it gives you...
-
mas985 replied to the thread Traditional air venturi vs blower for spa.Venturi tees are used with or without a blower so turning off the blower does not necessarily turn off the air to the venturis. They...
-
mas985 replied to the thread Solar cover only (no heater)?.In my experience, you should be able to get close to 10F or more bump with a solar cover on the pool depending on your local conditions...
-
mas985 replied to the thread Traditional air venturi vs blower for spa.In reality, the blower does not really add much in the way of strength to the jets because it is just air. The main purpose of a blower...
-
mas985 replied to the thread SWP-Pro Logic PS8 does not turn on Acid Dispenser.Do you hear the relay click when the controller tries to turn it on? If not, could be a bad relay or relay driver. You should be able to...
-
mas985 replied to the thread Pump size and number of jets..The plumbing around the spa looks fine, I just don't understand why the PB used such small pipe from the spa to the pump. Any other...
-
mas985 replied to the thread Pump size and number of jets..Not without separate suction lines and return lines going to pad. The current plumbing (1 1/2"?) is way too small for spa jets. That...
-
mas985 replied to the thread Pump size and number of jets..The blower attaches to the air line, not the jet water lines. That just means you have two air lines. With a suction, return and air...
-
mas985 replied to the thread Pump size and number of jets..One more pont, you said there were two loops but does each loop have it's own suction line and return line back to the equipment pad? If...
-
-
Loading…
-
Loading…
-
Loading…
