Latest activity Postings Media About
-
-
mas985 replied to the thread Failing T-15 SWG Cell Experiment.Yes, I am configuring the controller for a T-5 cell (smaller) even though the old cell is a T-15 model (larger). As SWG cells age, they... -
mas985 reacted to ajw22's post in the thread Hayward T-3 working but still reads low PPM, why? with
Like.
Check that the cell type is correctly set int he controller. -
The other day I got curious. I know there are three houses with pools right in a row up the street from me. So I started looking...
-
mas985 replied to the thread Hayward T-3 working but still reads low PPM, why?.Usually, it is one of two reasons: 1) Dirty cell. Remove cell and inspect for calcium deposits. If dirty, clean. I use bamboo skewers...
-
Maybe the gas valve is defective and it works when pointing up but not on its side? The fan will pull the gas into the holes so the gas...
-
mas985 replied to the thread Hayward H400 - Bizzare Issue + IF code.The odd part is that it fires with the nozzles tilted away from the burners but does not fire when the nozzles are in the correct...
-
mas985 replied to the thread Hayward H400 - Bizzare Issue + IF code.Yes, it does have a green wire:
-
-
-
-
-
mas985 replied to the thread Hayward H400 - Bizzare Issue + IF code.Did they install a sediment trap?
-
-
-
mas985 replied to the thread Hayward H400 - Bizzare Issue + IF code.I actually have the H400IDL2 as well. If you have an external controller, the heater should be in bypass mode.
-
mas985 reacted to BrianWithAY's post in the thread Hayward H400 - Bizzare Issue + IF code with Like.
Yep. That's the one
-
mas985 replied to the thread Hayward H400 - Bizzare Issue + IF code.I think it is the same heater I have H400IDL.
-
-
Loading…
-
Loading…
-
Loading…
