Latest activity Postings Media About
-
-
Nnabril15 replied to the thread Skimmer door is missing back foam...suggestions."weir", that's it. The word "weird" without the D. Thank you ajw. I don't own noddles, but I'll figure something out.
-
Nnabril15 reacted to ajw22's post in the thread Skimmer door is missing back foam...suggestions with
Like.
https://www.troublefreepool.com/threads/skimmer-weir-diy-foam-repair.249847/... -
Nnabril15 posted the thread Skimmer door is missing back foam...suggestions in Pumps, Filters, and Plumbing.Hello The door to my skimmer area, that has a name that I can't remember, is missing the foam backing so the flapping door remains open...
-
Nnabril15 replied to the thread Guidance with Posiflo PTM135 canister filter.Right So, insert the washer into the screw of the band, and then the nut obviously. And that helps with avoiding deformity and...
-
Nnabril15 reacted to 1poolman1's post in the thread Guidance with Posiflo PTM135 canister filter with Like.
The washer will help the nut and band-clamp from being deformed and allow it to tighten easier.
-
Nnabril15 replied to the thread Guidance with Posiflo PTM135 canister filter.Well said Can you elaborate on the brass nut and washer? I assume that the washer goes first and then the nut?
-
Nnabril15 reacted to 1poolman1's post in the thread Guidance with Posiflo PTM135 canister filter with Like.
If it works for you at the bottom, use it that way. That's how they came, but many moved it to a higher position so as to not have to...
-
Nnabril15 replied to the thread SWG Prepurchasing questions..I second genereleser's recommendation, as was said to me. Despite the flow switch that you will install for the SWG, it continues to...
-
Nnabril15 replied to the thread SWG Prepurchasing questions..My pool also holds 16k gallons of water, similar to yours, and I also researched it to death. After many recommendations, I got the...
-
Nnabril15 posted the thread Guidance with Posiflo PTM135 canister filter in Pumps, Filters, and Plumbing.Good morning I inherited this filter when I bought the house 13 years ago, and I think that I've been "using" it wrong. My model, as...
-
-
Nnabril15 replied to the thread Thread on the filter clamp seems to have stripped.Nope. The ring clamps have different circumferences, probably, and thus the different part numbers. I swapped the nut screw with the...
-
Nnabril15 posted the thread Thread on the filter clamp seems to have stripped in Pumps, Filters, and Plumbing.Hello After a good filter cleaning, I discovered that the thread on the bottom metal clamp of my filter housing is stripped at the point...
-
-
Loading…
-
Loading…
-
Loading…
