1
Latest activity Postings Media About
-
-
11poolman1 replied to the thread Trying to decide which solar pool panels to get.Sunstar panels connect similar to Heliocol so that is a plus. The iSwim panels use rubber tubes and hose clamps. These will need to be...
-
11poolman1 replied to the thread Some-what novice Tech. Multiport question.Usually because that line leaked and it is a quick way to stop the water loss. I see it a couple of times a year.
-
11poolman1 replied to the thread Some-what novice Tech. Multiport question.You will only lose some water (maybe a little very fine sand).
-
11poolman1 replied to the thread Pump not priming and motor making noise.Do not be surprised when that motor gets very loud. You can see the corrosion at the front of the motor. The seal has leaked for quite a...
-
11poolman1 replied to the thread Is this pump fixable?.Century EVO EVQ165. Nidec Neptune NPTQ165. Both motors will bolt to that pump. Century will allow you to use your existing time clock...
-
11poolman1 reacted to midmodonhillwood's post in the thread Upgraded from single speed to variable speed pump! with
Like.
I'm already noticing a difference in energy consumption with our solar and Emporia Energy Apps just with the default schedule. We have... -
11poolman1 replied to the thread Standalone vacuum pump.What size are the ports on the new pump" These will fit 1.5" directly: SPX1091Z7, Hayward hose adapter. If you have 2" you can get...
-
-
11poolman1 replied to the thread Jandy/Zodiac LXI Heater IGN Control issues.Sounds like you have an issue with the burner assembly itself. The slots in the main burner (the one that sits at the ignitor...
-
11poolman1 replied to the thread Trying to decide which solar pool panels to get.If you can get Heliocol do so. Separate tube design, so wind lift is not a major issue. The way the panels are connected eliminates the...
-
1Yup, common. No worries.
-
11poolman1 replied to the thread Spa not maintaining set tempurature.Your heater should be set to 104, its highest setting, and left there. It will only be able to be set when the automation completes the...
-
11poolman1 replied to the thread Some-what novice Tech. Multiport question.What part of the "multiport" was replaced? Only the top half it looks like based on the part number. Are there any chips in the slot the...
-
11poolman1 replied to the thread Upgraded from single speed to variable speed pump!.Its your pool, you can do what you want. No one is watching. While there are guidelines (somewhere published by CA), the basic...
-
-
Loading…
-
Loading…
-
Loading…
