You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
G
gregs replied to the thread
Metal stain help.
Everything is all clear now and looking good. The stain removal went well and the areas on the pool bottom looks great now. Still...
-
G
gregs replied to the thread
Metal stain help.
I was thinking the TA is a little to low according to the calculator?
I had to order some CYA. When that comes in I will work on...
-
G
gregs replied to the thread
Metal stain help.
The pool is fairly clear now. It’s not cloudy but not perfectly clear yet. It is starting to get a little sparkle to it. I cleaned the...
-
G
gregs replied to the thread
Metal stain help.
Got about 2” of rain in the pool yesterday. My chlorine guess worked well and everything is still holding above 3ppm for now. It did...
-
G
gregs replied to the thread
Metal stain help.
Ok. Bumped up the SWCG and added a bit more liquid chlorine that brought it almost to 5ppm. Expecting rain today so I am figuring on it...
-
G
gregs replied to the thread
Metal stain help.
Understood. FC is holding at the 2ppm range with the SWCG running at 20% and the PH is holding at 7.2. I could just barely see the...
-
G
gregs replied to the thread
Metal stain help.
That’s the range I typically operate it at and what it had reverted back to over the weekend.
The cloudiness didn’t get much better...
-
G
gregs replied to the thread
Metal stain help.
I got home late last night to find the pump running on a very slow speed. In my haste to get the SWCG back online I didn’t get...
-
G
gregs replied to the thread
Metal stain help.
Thanks. I decided not to add the polyquat. I also add a low amount of CYA just bringing it up slow. Otherwise just letting it run for now.
-
G
gregs replied to the thread
Metal stain help.
So my thought is now that with the previous Metal Magic treatment and the current use of it after the AA that I might have a higher...
-
G
gregs replied to the thread
Metal stain help.
I have 2 bubblers on the sun shelf that when I open the valve full it makes a good bit of aeration. And I have been doing that. My PH...
-
G
gregs replied to the thread
Metal stain help.
I do have a variable speed pump. I have been running it full speed 24/7 thinking this would offer the most filtration.
Overnight I lost...
-
G
gregs replied to the thread
Metal stain help.
That’s one of the posts I read thru prior to starting. I was wondering if adding the borax or soda ash makes the cloudiness worse?
My...
-
G
gregs replied to the thread
Metal stain help.
The pool looked good then went cloudy after adding the Metal Magic. I knew this would happen and didn’t worry to much about it. I have...
-
G
gregs replied to the thread
Metal stain help.
I normally keep the CYA at the 60-80 level. It was low from rains and since it was winter I didn’t worry to much about it. I was...
-
Loading…
-
Loading…
