Latest activity Postings Media About
-
-
PoolGate replied to the thread The Ghost in the Machine is Back.......Yes 100%. It is not happening at the panel and I am the only one with access to the interface. -
PoolGate replied to the thread The Ghost in the Machine is Back.......That will disable the entire system. No pump, no SWG, no Heater, etc, etc. The ghost is random. I can go a week with nothing then wake...
-
PoolGate replied to the thread The Ghost in the Machine is Back.......Yes and this is what I did. I open when it gets to around 60. I opened to the above mess and it was below 60. Right now sitting at 58...
-
PoolGate replied to the thread The Ghost in the Machine is Back.......I have done that many times. Nothing is out of the ordinary. And nothing programmatic calls or has ever called for heat (or the light)...
-
PoolGate reacted to magiteck's post in the thread Let’s see your water after removing winter cover!! *PICS THREAD* with
Love.
Here was my 6-day progression. -
PoolGate replied to the thread The Ghost in the Machine is Back.......No spa-side. No hard-wired controllers at all.
-
PoolGate replied to the thread Let’s see your water after removing winter cover!! *PICS THREAD*.It is close already.
-
-
-
PoolGate replied to the thread Necessary to heat salt pool when opening early?.Saltwater generators typically will not work below 55 degree water temp. If you want your SWG to work, then you could heat to 60. That...
-
PoolGate replied to the thread Let’s see your water after removing winter cover!! *PICS THREAD*.ughh...
-
-
-
PoolGate replied to the thread What is this part A0186300?.FYI: These do not last forever. I suggest you buy a pack just in case they break. https://www.amazon.com/gp/product/B004YLIKAI
-
PoolGate replied to the thread Cleaning Cell - Muriatic vs Vinegar.Thanks - that link does show that vinegar is "better" than muriatic which is what I was looking for. This is more for my tri-sensor. I...
-
PoolGate replied to the thread Jandy SWG repairs detailed for future me - HH error on older system.I was looking at those cheap chinese boards too. I will pass on them as well. I am hoping my board is ok.
-
PoolGate replied to the thread 0 CYA and 0 FC. Need advise.Until the ammonia is gone, your chlorine will be almost 0. FYI: This process will result in your pH being very low. Once done, check it...
-
-
Loading…
-
Loading…
-
Loading…
