Report

PoolGate

Gold Supporter TFP Guide

Well-known member From Damascus, MD

Joined: Jun 7, 2017

Start conversation

Latest activity Postings Media About

- PoolGate replied to the thread Jandy JXi Copper or CuproNickel.
  
  Here it is! I replaced the heat exchanger with a new one. I did not repair the old one...
  
  Today at 10:40 AM
- PoolGate replied to the thread Polaris360 connecting to my 37 ywar old Anthony Pool.
  
  Have you considered a robot instead?
  
  Today at 8:39 AM
- PoolGate replied to the thread Neptune NPTQ270 controlled via Jandy Aqualink RS485/modbus.
  
  Plug it in and find out. There are only 3 different pumps you can select. Only 1 if it mimics Jandy.
  
  Today at 8:34 AM
- PoolGate replied to the thread Nature2 / Jandy PLC1400 error.
  
  I need to do a deep dive troubleshooting on it. This weekend is pool maintenance weekend. I'll measure the voltage and see. I can get...
  
  Today at 6:31 AM
- PoolGate replied to the thread Nature2 / Jandy PLC1400 error.
  
  I just replaced the cable with a new one and it made no difference. Not sure what the voltage should be but it runs at "4". For now it...
  
  Yesterday at 5:42 PM
- PoolGate replied to the thread Jandy JXi Copper or CuproNickel.
  
  I replaced my heat exchanger 2 years ago after 5 years of no issues. It developed a leak. The exchanger itself was pristine other than...
  
  Yesterday at 3:33 PM
- PoolGate replied to the thread Pool Temp and Opening.
  
  So far I have emptied my robot vacuum canister 5x. Each time it was so heavy it could not run itself up to the wall to retrieve and I...
  
  Yesterday at 2:50 PM
- PoolGate replied to the thread Nature2 / Jandy PLC1400 error.
  
  Ha - yeah I will I need to crack it open. Maybe after work if it isn't raining again.
  
  Yesterday at 12:48 PM
- PoolGate posted the thread Nature2 / Jandy PLC1400 error in Salt Water Chlorine Generators (SWG).
  
  I am getting 120 error on my LCD panel. -->120 Low current in forward direction to Cell. 1. Clean cell if necessary (see Section 6.3).2...
  
  Yesterday at 12:05 PM
- PoolGate added the media item 20240417_111556.jpg to Pool Equipment.
  
  Yesterday at 12:05 PM
- PoolGate added the media item 20240417_113605.jpg to Pool Equipment.
  
  Yesterday at 12:05 PM
- PoolGate replied to the thread Pool Temp and Opening.
  
  Hopefully I didn't overshoot the mark on salt. I was just below 1000 and added 400lbs (per pool math) and it brought it to the expected...
  
  Yesterday at 7:53 AM
- PoolGate replied to the thread Pool Temp and Opening.
  
  Already looking much better. I've added another 3 gallons of 10%.
  
  Tuesday at 7:53 PM
- PoolGate added the media item 20240416_194104.jpg to General Pool Photos.
  
  Tuesday at 7:53 PM
- PoolGate replied to the thread Pool Temp and Opening.
  
  ;) I wonder if this is some aggressive form of algae? I just turned on the pool and the pool temp shows as 61. Hard to believe the algae...
  
  Tuesday at 2:30 PM
Show older items
Loading…
Loading…
Loading…

Top Bottom

Back

Search

PoolGate

Find content

Latest activity Postings Media About