Does anyone know of a simple chlorine drop test like the K-1000 that goes up to 10ppm? I have high stabilizer and my minimum target is 8.
K-1000 but with bigger Chlorine scale
- Thread starter Tjcervenka
- Start date
- May 3, 2014
- 58,351
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I do, but need to do it everyday bc the scale on the K-1000 only goes to 5.
The scale on the OTO test isn't useful for actual numbers. You're looking for a general "kind of in the neighborhood" sanity check between FAS-DPD testings, anything else is asking a lot for an OTO test.
Even if it was more reliable, it seems a lot easier to fix the CYA problem than to try to get special equipment to run it. The pH test loses reliability when the FC is over 10 as well, so that's not going to be as accurate as it should be.
Even if it was more reliable, it seems a lot easier to fix the CYA problem than to try to get special equipment to run it. The pH test loses reliability when the FC is over 10 as well, so that's not going to be as accurate as it should be.
Similar threads
