|
It is currently May 25th, 2012, 9:50 pm
|
 |
|
 |
|
| Author |
Message |
|
Steve737
|
Post subject: What size Intellichlor should I get?  Posted: November 18th, 2011, 10:37 am |
| Lifetime Supporter |
 |
Joined: September 25th, 2011, 5:40 pm
Posts: 72
Location: Montgomery Texas
|
|
Sorry for all the questions? But hopefully these will help someone else too in the future. My pool will be approximately 32000 gallons. I thought I read about how you should oversize the swg. should I go with the ic-40 or 60? Thanks steve
_________________
24X38'ish 23,500 gallon Geometric with 10x10 spa(12jets), Pentair IC40 SWG, Pentair intelliflow(pool-spa), pentair whispersflow 2HP(booster spa jets), Two Polaris 1.5 Hp blowers, Pentair Wisperflow XF 3HP(2 6 foot water falls), Pentair clean&clear plus 520, Pentair Master temp 400. Intelli PH acid dispenser, Intellitouch with iPhone and iPad control. Two 45000 BTU fire bowls and one 60000 BTU fire pit.
|
|
|
|
 |
|
XsAllOverIt
|
Post subject: Re: What size Intellichlor should I get? Posted: November 18th, 2011, 10:54 am |
| Lifetime Supporter |
|
 |
Joined: December 8th, 2010, 2:39 pm
Posts: 502
Location: Mount Airy, Maryland
|
|
I've got a 22,000 gallon pool with an IC-40 and it works great at 10% with the pump running full-time. If I were buying one for a 32000 gallon pool, I would opt for the ic-60 and run at lower percentages than run an IC-40 at near 100%.
_________________
18 x 36 Inground Gunnite, White Plaster 21K gallon
18" raised spa, 8' Diameter (620 gallon)
Triton II Sand filter, Intellichlor IC40 SWG
Pentair Pump, Max-E-Therm 400 BTU
Lamotte ColorQ PRO 7-Plus test kit
TFT-100 test kit
|
|
|
|
|
|
|
bk406
|
Post subject: Re: What size Intellichlor should I get? Posted: November 18th, 2011, 11:02 am |
Joined: December 3rd, 2009, 11:28 am
Posts: 2423
Location: Central Massachusetts
|
|
+1 on the IC-60
_________________
14,000 gallon IG, Vinyl. Hayward 3/4 hp superpump, Penatair IC40 SWCG, Pentair automation, Hayward sand filter, Aqua Comfort heat pump, Hayward 400k Lo-Nox LP heater.
|
|
|
|
|
|
|
Steve737
|
Post subject: Re: What size Intellichlor should I get? Posted: November 18th, 2011, 11:53 am |
| Lifetime Supporter |
|
Joined: September 25th, 2011, 5:40 pm
Posts: 72
Location: Montgomery Texas
|
|
I was thinking the same thing I just wanted some other assurance. Thank you.
_________________
24X38'ish 23,500 gallon Geometric with 10x10 spa(12jets), Pentair IC40 SWG, Pentair intelliflow(pool-spa), pentair whispersflow 2HP(booster spa jets), Two Polaris 1.5 Hp blowers, Pentair Wisperflow XF 3HP(2 6 foot water falls), Pentair clean&clear plus 520, Pentair Master temp 400. Intelli PH acid dispenser, Intellitouch with iPhone and iPad control. Two 45000 BTU fire bowls and one 60000 BTU fire pit.
|
|
|
|
|
|
|
DBfan187
|
Post subject: Re: What size Intellichlor should I get? Posted: November 18th, 2011, 12:19 pm |
Joined: August 7th, 2007, 11:35 am
Posts: 601
Location: PAP
|
|
|
|
|
|
|
JamesW
|
Post subject: Re: What size Intellichlor should I get? Posted: November 18th, 2011, 2:22 pm |
Joined: March 2nd, 2011, 8:02 pm
Posts: 1612
|
|
If you're not getting automation, you might want to consider adding it because it will give you better control of the cell output. Without automation, the cell can be difficult to tune to your needs.
|
|
|
|
|
|
bobby1017
|
Post subject: Re: What size Intellichlor should I get? Posted: November 18th, 2011, 2:34 pm |
| Lifetime Supporter |
|
Joined: February 2nd, 2011, 12:49 am
Posts: 313
Location: Petaluma, Ca
|
|
I had an ic-40 with my 33,000 gallon pool keeping the cl @ 4ppm when set at 35%, not to say bigger isnt better. The water was circulated for about 12 hrs a day at that time. It was just replaced due to faulty salt measurments though.
_________________
DONE, 20 x 40, inground gunite, 30" raised bond beam with 3 12" sheer decents, 8' diving board, pentair 420 cartrige filter, vs-3050 pump, intellechlor ic-40, auto cvr, Tahoe blue pebble tech, 6ea 4 x 12 solar pnls, legend robotic cleaner.
|
|
|
|
|
|
|
Steve737
|
Post subject: Re: What size Intellichlor should I get? Posted: November 18th, 2011, 3:27 pm |
| Lifetime Supporter |
|
Joined: September 25th, 2011, 5:40 pm
Posts: 72
Location: Montgomery Texas
|
|
I'm doing the intellitouch system for automation. I'm going to go to the ic-60 it's not that much more money and I can always go down but I can't go up:) thanks
_________________
24X38'ish 23,500 gallon Geometric with 10x10 spa(12jets), Pentair IC40 SWG, Pentair intelliflow(pool-spa), pentair whispersflow 2HP(booster spa jets), Two Polaris 1.5 Hp blowers, Pentair Wisperflow XF 3HP(2 6 foot water falls), Pentair clean&clear plus 520, Pentair Master temp 400. Intelli PH acid dispenser, Intellitouch with iPhone and iPad control. Two 45000 BTU fire bowls and one 60000 BTU fire pit.
|
|
|
|
|
|
|
|
 |
|
 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
RSS Feed 
