Hi guys,
Something feel off the a top shelf and strait into the screen of my Intellipro Pump
It cracked the outer Glass, control panel display and buttons are dead, but the circuits looks fine. (the pump didnt stop and is still running)
I took it apart carefully this morning and the control panel casing had fell apart into the unit.
I put everything back and for the moment the screen and buttons remain dead. (only the "on" led sometimes turns on)
The pump is still running (I have not attempted to power cycle it )
When i do, the controls might turn back on... but it might also "not" and if it does not I will be in a hurry to find a solution...(hense, why for the moment i'm not touching it)
anybody had this happen to them??
Turns out we can't just buy the control panel, need to buy the whole drive, and prices seem to be in the 700-800$
Does anybody know if i connect an intellitouch on the unit will i need a working control panel?
I'm trying to figure out what intellitouch i need. I have a heat pump, two pumps (pool and spa) and a dozen valves..
I am aware that the intellitouch will cost more, but i have been contemplating this for a while, since my wife finds it a bit complicated to turn the spa on ( need to turn 4-5valves)
I am also unhappy with the fact that there is no timer on my heat pump and if i leave it set to 82 it runs mostly at night when its cooler and costlier. (live in Montreal Canada... nights here sometimes get cold)
anyhow i want to make sure the panel i buy will support all 12 valves, might not buy the valve controllers right away but need to make sure its possible!
Something feel off the a top shelf and strait into the screen of my Intellipro Pump
It cracked the outer Glass, control panel display and buttons are dead, but the circuits looks fine. (the pump didnt stop and is still running)
I took it apart carefully this morning and the control panel casing had fell apart into the unit.
I put everything back and for the moment the screen and buttons remain dead. (only the "on" led sometimes turns on)
The pump is still running (I have not attempted to power cycle it )
When i do, the controls might turn back on... but it might also "not" and if it does not I will be in a hurry to find a solution...(hense, why for the moment i'm not touching it)
anybody had this happen to them??
Turns out we can't just buy the control panel, need to buy the whole drive, and prices seem to be in the 700-800$
Does anybody know if i connect an intellitouch on the unit will i need a working control panel?
I'm trying to figure out what intellitouch i need. I have a heat pump, two pumps (pool and spa) and a dozen valves..
I am aware that the intellitouch will cost more, but i have been contemplating this for a while, since my wife finds it a bit complicated to turn the spa on ( need to turn 4-5valves)
I am also unhappy with the fact that there is no timer on my heat pump and if i leave it set to 82 it runs mostly at night when its cooler and costlier. (live in Montreal Canada... nights here sometimes get cold)
anyhow i want to make sure the panel i buy will support all 12 valves, might not buy the valve controllers right away but need to make sure its possible!