We just set got our pool up and running last week. Its an Intex metal frame vinyl that holds about 3000 gallons. Picked up some fairly cheap test strips just to see whats going on. According to the strips the readings are
Total Hardness: 200
Free chlorine: 0
pH 8.4
Alkalinity: 240
CYA:0
The water temp is about 68F and is a little cloudy but not too bad. Just from reading on here and other places the numbers are way off. Whats my first step to getting things back in order and what chemicals are needed to keep it that way. Thanks
Total Hardness: 200
Free chlorine: 0
pH 8.4
Alkalinity: 240
CYA:0
The water temp is about 68F and is a little cloudy but not too bad. Just from reading on here and other places the numbers are way off. Whats my first step to getting things back in order and what chemicals are needed to keep it that way. Thanks