Hey all, so I'm slowly making the transition from trichlor tabs over to bleach. There was heavy rain the past couple of days and now the pool is very cloudy. Tested the water today and there was 0 FC although there were two trichlor pucks in the skimmer.
30-35k gallons
Plaster
FC- 0
pH-7.5
TA-160
CH- 300
CYA- 60
At one point when I tested about two weeks ago the CYA reading I got was around 70-80 but I think the heavy rainfall helped lower that a bit. I used poolmath and added 242 fl oz of 8.25% Clorox bleach into the pool making sure to poor slowly in front of the water jet. This was about 3 hours ago. My question is how long should it take to raise the FC from 0 (or close to 0) to around 6-7? I just tested for FC again and the reading is still at 0. Thanks!
30-35k gallons
Plaster
FC- 0
pH-7.5
TA-160
CH- 300
CYA- 60
At one point when I tested about two weeks ago the CYA reading I got was around 70-80 but I think the heavy rainfall helped lower that a bit. I used poolmath and added 242 fl oz of 8.25% Clorox bleach into the pool making sure to poor slowly in front of the water jet. This was about 3 hours ago. My question is how long should it take to raise the FC from 0 (or close to 0) to around 6-7? I just tested for FC again and the reading is still at 0. Thanks!