Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: How To Test Power from Intellichlor Transformer with EasyTouch

  1. Back To Top    #1

    Join Date
    May 2015
    Location
    madison wi
    Posts
    6

    How To Test Power from Intellichlor Transformer with EasyTouch

    Hi all,

    trying to diagnose an issue with my IC40. The lights all flicker for an instant when power is turned on, but thats it. No more lights. Diagnostics on the panel show ok, as well as the little Intellichlor green light on the board.

    I have the Easy Touch panel and want to test the power both coming from the Transformer as well as the circuit board.

    To start with, how do I test the power from the Transformer? There appear to be two red wires coming from the unit. One to the circuit breaker, the other to the circuit board.

    Any help would be much appreciated!

  2. Back To Top    #2
    Texas Splash's Avatar
    Join Date
    Jun 2014
    Location
    South-Central Texas, Marion/San Antonio
    Posts
    12,943

    Re: How To Test Power from Intellichlor Transformer with EasyTouch

    Hello! I see you haven't received a reply yet on your post about the transformer w/ easy touch. I just wanted to let you know we haven't forgotten about you. This reply should get your posting updated back to the top of the queue where hopefully someone experienced with your specific question can provide some constructive answers. Thanks for checking-in with TFP, and have a great day.
    Pat (a.k.a. Texas Splash) ~ My Pool: Viking Fiberglass; 17,888 Gal; Waterway Supreme 2-sp/2-hp pump; Hayward Ctg filter; TF-100 w/ Speed Stir
    Vital Links: POOL SCHOOL, RECOMMENDED LEVELS, RECOMMENDED CHEMICALS, Poolmath Calculator, SLAM, Chlorine/CYA CHART.
    If you enjoyed your TFP experience, please consider donating to Support TFP!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •