We are in the process of getting the fabric for our pool cover replaced and upon removing it -several parts need to be replaced. The system (Infinity 4000) was installed by Pool Covers Inc around August 2007. Below is a link to the "overall view" of the hardware on an Infinity 4000.
The roll-up tube and the end castings have fallen apart due to deterioration from the salt. Any recommendations where I can order these parts?
Also, the mechanism to rotate the roller tube, also know as the double dog (shown in overall view and parts breakdown links below -item 22207) isn't working properly. The pin isn't engaging fully for one direction. Some WD40 has loosened it but not completely. Any recommendations on how to rebuild this?
Thanks for reading!!!
Link to overall view: Dropbox - Infinity4000Overview.jpg
Link to parts breakdown: Dropbox - Infinity4000Parts.jpg