Aqua rite chlorine generator control box has stopped working.

[Paladin]

Hi all,
Yesterday when I went out to check the temp in my pool, my aqua rite chlorine generator control box was off, no lights or display. I checked the power at the plug 120volts it's good, but when you unplug and plug it back in, it just makes a big humming noise and quits no display or any lights. I took the face cover off to look inside, I don't see anything burnt, just circuit boards.

Thank you in advance for the help and Info.

Tom

 

[tim5055]

I can't help with the SWG issue, but just wanted to point out to be sure to manually chlorinate with bleach until you get it working again.

 

[Paladin]

Thanks Tim, I will do that.

 

[Paladin]

Hello again, As I was looking in my paper files on this aqua rite chlorine generator today, I found a fuse taped to the manual. so I went out and I changed the fuse, the old one still looked good, but it wasn't any good after all. I plug the control box back in and
now it is working , well all the lights are on and display, I'm going to go check and see if it is making chlorine.

Tom

 

[Paladin]

Well it seems to be working now, higher chlorine content at the return line while generating. Next time I will double check Fuse before posting.

Thanks to all

Tom