Hey guys,.... Working on a 22x52 Intex Ultra Frame AGP.... The system is corroding horribly on the output side of system...The input side looks brand new..(Faulty pump??) ...I have cleaned the bad side twice with vinegar and have it soaking now (3rd time)...It also shuts down for "low salt" error ....Please see salt levels at the bottom..(plenty of salt).. My FC levels have been drastically low according to strips since day one and that's with 2-3 boost cycles...This past Saturday I added 151oz of 8.2% liquid chlorine as instructed by poolmath app..The SWG pump is rated for 12gr/hr and max is for 3,00gph.
Any suggestions on these would be greatly appreciated....seem to be fighting a losing battle or always chasing..
I have issues with chemistry in which I'm trying to correct....its all over the place......I know if its not stable other areas will be uncontrollable.
Levels are
Store analysis : Strip Test (aquacheck)
FC.5 Fc 3-5
pH 7.8 pH 8.4 ( pink ish red on strip )
TA 135 TA 180 ish (per strip)
CH 225 stabilizer 30-50 ish
Stabilizer 30 (added 2.5 lbs last week)
Salt 3900
(pool has been open for a month now)
This morning I added 24 oz of Hydro. acid to lower the pH ( which should lower the TA???) .....
Any suggestions on these would be greatly appreciated....seem to be fighting a losing battle or always chasing..
I have issues with chemistry in which I'm trying to correct....its all over the place......I know if its not stable other areas will be uncontrollable.
Levels are
Store analysis : Strip Test (aquacheck)
FC.5 Fc 3-5
pH 7.8 pH 8.4 ( pink ish red on strip )
TA 135 TA 180 ish (per strip)
CH 225 stabilizer 30-50 ish
Stabilizer 30 (added 2.5 lbs last week)
Salt 3900
(pool has been open for a month now)
This morning I added 24 oz of Hydro. acid to lower the pH ( which should lower the TA???) .....