I just installed a salt water chlorine generator. When I turn the pump on, water seems to be flowing normally; water comes out of the returns in the pool forcefully. But water does not flow into the generator cell, which is mounted (following the manufacturer's instructions) 6 inches above the return line.
The manufacturer of the chlorine generator says the water flow must be insufficient, but I don't see any leaks. I can see water moving in the vertical pipes just below the generator, but it doesn't quite get into the body of the generator. Any suggestions? I attached a photo; I hope you can see it.
The manufacturer of the chlorine generator says the water flow must be insufficient, but I don't see any leaks. I can see water moving in the vertical pipes just below the generator, but it doesn't quite get into the body of the generator. Any suggestions? I attached a photo; I hope you can see it.