Was hoping to get some assistance with programming my new pump. As I understand the Hayward aqualogic cannot provide an interface with the VS pump. With this in mind I have it set so that the aqualogic provides power to the pump twice a day through the timers menu. When this happens the pump turns on to whatever the last selected speed was on the pump panel. Without purchasing a separate controller is there a way to program the pump to run at different speeds during the time the aqualogic is providing power? As an example could I use the aqualogic to set the first run time of the pump from 6am to 7am and concurrently use the pump interface to indicate that between these times the pump run at high speed for skimming. Then for the 2nd run time set it up say from 7am to noon and concurrently use the pump interface to indicate that between these times have the pump run at say 1500 rpm for filtering? Hopefully using the right terminology here so it makes sense. Appreciate any assistance.