Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: New build - vinyl coming off in two areas after fill

  1. Back To Top    #1
    karynkjd's Avatar
    Join Date
    Mar 2015
    Location
    Berlin, NJ
    Posts
    325

    New build - vinyl coming off in two areas after fill

    Again thank God for this forum because my PB never replies to concerns!

    In our low end there are two areas that the vinyl comes off. They said previously it was because water wasn't in all the way but now pool is completely filled. Should we stop swimming until PB comes out tomorrow - can we seal it with duct tape bc now chance of rain today?
    New Build started April 2015, 20x30x40 Lagoon Style Vinyl (indigo marble/blue granite), 27,500 GAL, IG, 839 square feet, 9' tanning ledge/baja shelf, 9' radial bench, 8' classic Waterfall, 3'6" to 8'Depth, Sand, Pentair 2 speed Superflow 1 1/2 HP, SWS, 2 Pentair LED Intelibright 5 G lights, Pentair Legend Platinum II pool cleaner, 2 skimmers, 3 returns. 1080 square feet of Silver Slate stamped concrete.

  2. Back To Top    #2

    Join Date
    Apr 2014
    Location
    Stony Brook, NY
    Posts
    157

    Re: New build - vinyl coming off in two areas after fill

    Quote Originally Posted by karynkjd View Post
    Again thank God for this forum because my PB never replies to concerns!

    In our low end there are two areas that the vinyl comes off. They said previously it was because water wasn't in all the way but now pool is completely filled. Should we stop swimming until PB comes out tomorrow - can we seal it with duct tape bc now chance of rain today?
    That's ridiculous! Have them install it properly
    14000 gallon 16x32 roman in ground vinyl, Hayward 140k heat pump, swg, de filter 1 1\2 HP v.s. pump. Built in June 2014. Tf100 test kit.

  3. Back To Top    #3
    karynkjd's Avatar
    Join Date
    Mar 2015
    Location
    Berlin, NJ
    Posts
    325

    Re: New build - vinyl coming off in two areas after fill

    Oh I intend to tomorrow when they come or 1000% they aren't getting final payment until this vinyl stays in the pool and the inspections are complete but for now?


    New Build started April 2015, 20x30x40 Lagoon Style Vinyl (indigo marble/blue granite), 27,500 GAL, IG, 839 square feet, 9' tanning ledge/baja shelf, 9' radial bench, 8' classic Waterfall, 3'6" to 8'Depth, Sand, Pentair 2 speed Superflow 1 1/2 HP, SWS, 2 Pentair LED Intelibright 5 G lights, Pentair Legend Platinum II pool cleaner, 2 skimmers, 3 returns. 1080 square feet of Silver Slate stamped concrete.

  4. Back To Top    #4

    Join Date
    Mar 2014
    Location
    Canada
    Posts
    14

    Re: New build - vinyl coming off in two areas after fill

    Sometimes some vinyl will pop out in a few sections during a new install. Its an easy fix, no need to worry. Don't put duct tape on it. It can leave glue residue on the liner which can be a pain to get off. If your worried about water going behind the vinyl cover it over with a small tarp or a garbage bag for now until they get there to put it back in.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •