Aquapure 700 -> 1400

[EddieA]

I'm thinking of upgrading my Aquapure from a 700 to 1400 to let me cut down on the run times needed to maintain the chlorine level in a small spa. This is one of the older versions with the display/controls on the front of the control box.

Reading through the parts list, it looks like all I need replace is the back PCB board, as that is the only part that has separate numbers for 700 and 1400. And obviously I will need a new cell.

Am I correct in my assessment.

Cheers.

 

[UN1017]

That's correct. They use the same transformer and control/display board. Confirm...this is only to sanitize a spa, not the pool as well? How many gallons?

Also, to be sure, I would call Jandy (Zodiac) and make sure there isn't some secret switch that you have to flip after the conversion.

 

[EddieA]

That's correct. They use the same transformer and control/display board. Confirm...this is only to sanitize a spa, not the pool as well? How many gallons?

Yes, it's just a small spa, no pool, around 1,000 gallons, so it doesn't need a huge run-time in order to filter the water every day.

Cheers.