Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Attachiing ladder to deck

  1. Back To Top    #1

    Join Date
    Jun 2015
    Cincinnati Oh

    Attachiing ladder to deck

    Hello all! I'm new here but I have an above ground pool and I'm having my deck built around it. I just put the stairs in yesterday and the deck actually sits a few inches below the aluminum top of the pool. My question is how do I attach the stairs, it came with the paddles for deck attachment but I would have to nail some 4x4's to the deck and just to make the paddle attachments fit, and I really just don't think it will look right. Has anyone else run into this problem? And is there a better way to attach them than adding the 4x4's and not having to purchase new stairs? Any input and pictures help! Thanks everyone!

  2. Back To Top    #2
    Mod Squad kimkats's Avatar
    Join Date
    Jul 2012
    Tallahassee, FL

    Re: Attachiing ladder to deck

    We had to put in "shims" like you said. We beveled the edges to make them prettier.

    TFP Moderator 33x52 round AG 25,600 gals Sand Filter 1.5hp Pump - 2 Speed, SLAM, Pool School, Recommended Levels, Recommended Chemicals, Pool Math, Chlorine/CYA Chart, TF-100 Test Kit

  3. Back To Top    #3
    Medic3's Avatar
    Join Date
    Jun 2011

    Re: Attachiing ladder to deck

    We used a piece of 2x12 treated lumber cut to fit the shape of the ladder that actually touches the deck. The we attached the ladder to the board. No one has ever noticed except for me and to honest I have forgotten about it.
    20,000 gal. 27' AGP
    Hayward 18" sand filter with 1 hp Hayward Matrix pump
    A convinced BBB user and TFP fan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts