im trying to install a new intelliflo vs to a compool ez touch upgrade.. the comm wire DOES go to the 4 wire terminals on the comm port using the yellow and green. right?? dang, i cant get it to communicate. any ideas???
I looked in my manual and in every case I can see the com wire from the pump connects yellow to yellow and green to green, just like you said. I did see where the manual says "The Easytouch will not start communicating with the pump until the pump is assigned to a circuit." Have you gone into the Easytouch and set the pump type to VS?
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!