Have a thread going in SWG sub-forum and I thought i'd move the further updates into this section as its really about SLAM and chem at this point and most comments in that thread now is about chem and not about the SWG which turned out be fine (I think... will see when the chem is back to normal).
Here's the thread
Aquapure SWG not making chlorine. Salt test/sensor accuracy?
To make the long story short, this season I've opened to a slightly greenish pool, shocked it few times and thought I was good to go, the water was clear and beautiful in just two days, but obviously it was never fully cured as the pool been devouring chlorine ever since like crazy.
So started the SLAM today.
Pre SLAM number in the morning were
FC 0.2
CC 0.8
PH 7.2
TA 120
CH 260
CYA 65
The last update I posted in the other thread:
Added another 5 gallons, FC is at 26 as of 6pm. The good news is that CC were pretty much at zero last two times I checked. All out of 12% bleach now... will switch to 8%.
Here's the thread
Aquapure SWG not making chlorine. Salt test/sensor accuracy?
To make the long story short, this season I've opened to a slightly greenish pool, shocked it few times and thought I was good to go, the water was clear and beautiful in just two days, but obviously it was never fully cured as the pool been devouring chlorine ever since like crazy.
So started the SLAM today.
Pre SLAM number in the morning were
FC 0.2
CC 0.8
PH 7.2
TA 120
CH 260
CYA 65
The last update I posted in the other thread:
Added another 5 gallons, FC is at 26 as of 6pm. The good news is that CC were pretty much at zero last two times I checked. All out of 12% bleach now... will switch to 8%.