I have new pump installed and am trying to set it up as follows
Time Flow Purpose
-------------- ------- -------------
1am - 1pm 17gpm filtering / SWG
1pm - 5pm 35gpm Additional purpose - Increase flow so
heat pump kicks on and heats pool if required
5pm - 6pm 50gpm Additional purpose - Increase flow for better skimming
6pm - 11pm 17gpm Elimates heater
11pm - 1am 0gpm 2 hours no pumping
So I setup up the filter to filter from 1am until 11pm. Then I setup features (starting with 3) to change the flow as decribed. Tried it last night and the when the pump was supposed to pump at 50 the display showed it was pumping only at 31 gallons instead.
I am pretty good with technology so I am pretty sure i set it up correctly. But based on the results I guess I am not as good as i thought. Is there something I am missing? Any help will be appreciated.
Thanks.
Time Flow Purpose
-------------- ------- -------------
1am - 1pm 17gpm filtering / SWG
1pm - 5pm 35gpm Additional purpose - Increase flow so
heat pump kicks on and heats pool if required
5pm - 6pm 50gpm Additional purpose - Increase flow for better skimming
6pm - 11pm 17gpm Elimates heater
11pm - 1am 0gpm 2 hours no pumping
So I setup up the filter to filter from 1am until 11pm. Then I setup features (starting with 3) to change the flow as decribed. Tried it last night and the when the pump was supposed to pump at 50 the display showed it was pumping only at 31 gallons instead.
I am pretty good with technology so I am pretty sure i set it up correctly. But based on the results I guess I am not as good as i thought. Is there something I am missing? Any help will be appreciated.
Thanks.
