Purchased new Hayward 16" sand filter/pump system for Intex Ultra Frame 18' x 48" pool. The goal was install sand filter / SWG by house which is 30' from pool. PVC pipe from pump to pool. I checked elevations of pump suction flow line relative to pool skimmer box suction exit. The pump elevation at house is about 1'-11" higher than pool base (ground). Adding the pump base platform and the wood platform it would set on means that the flow line elevation of the pump suction side is 2" above the flow line of the skimmer. Will this setup still pump to the sand filter without suction problems or that of priming? Thanks,