I have been learning about my Jandy iAquaLink setup and need some help. I've been able to schedule devices and set up the One Touch features. My issue is when I am in the Spa Mode, my VS pump runs at 3,400 RPM no matter what I try. I haven't been able to program the pump it for different speed when in the spa mode. I have a heat pump and want to heat up the spa at 2,200 RPM. After reaching 102 F and ready to jump into the spa, I would then kick it up to 3,400 RPM to enjoy the jets. I've set up the lower speed on the pool, but as soon as I select spa mode, the valves change and the pump speed jumps to 3,400.
Thanks,
Thanks,