Need help with Aquarite Ele Chlorine Generator

[Jeff9353]

Here my readings on my Hayward AquaRite when I push the button.

3300
82
27.3
4.73
96p
-3100
AL-0
r1.59
E-4
Cheched my ph with pool tester kit and ph showing high.
Chlorine shows low.
I have no idea what these reading are. I have a 16 x 32 x3ft to 5 ft deep
Can someone help me with what I need to do. Pool looks great and water very clear. Thanks!

 

[JamesW]

Average salt level
water temperature
volts dc
amps
percentage run time (3 hour cycle)
Instant salt
Product name code
Software revision number
T cell type (it probably reads t-9)
assuming you have a t-9 cell, everything looks good.

You need to get some chlorine in the pool quickly. You might need to Slam. If you can post all of your chemistry numbers, we can further assist you.

 

[Jeff9353]

How do I get the chemistry numbers. I'm dumb here. Thanks for replying.

 

[JasonLion]

You either get an appropriate water test kit, or you have a pool store test the water for you. We recommend getting your own test kit, as pool store results are often quite inconsistent.

 

[pooldv]

Here is a Test Kits Comparison of good test kits. I prefer the TF100 from tftestkits.net

Here is the information we are looking for about your pool and water chemistry.
Pool School - Read This BEFORE You Post

 

[Jeff9353]

Thanks pooklv. I took a water sample to the pool store and they tested my water and I got some chemicals and everything back to normal. I stll need to read read and read. thanks againg for your helping me.