No Flow

[Dan P]

Is it normal to get a no flow reading on the SWG every now and again, then goes to flow?

 

[bobodaclown]

No. Not normal. What brand?

 

[Dan P]

Jandy Aquapure 1400. It did it earlier today with a clean filter and running pump at 1800 rpm which is more than required by Jandy after a call to them. If it's not normal the unit is still under warranty and would be to notify the builder.

 

[bobodaclown]

Could be loose wire or switch going.

 

[pooldv]

I had that issue with mine when running my VSpump at 900 rpm. As the filter clogged up I would get low flow error sometimes. Bumped it to 1100 rpm and problem solved.