Hello all,
I have been reading and trying but finally broke down and created an account because I can not get my pool clear and could use the advice.
To start - I do not have a test kit (it's on the todo list but being a newly *broke home owner to a distressed property my wallet is tapped.), I live in AZ, pebble tec play pool roughly 10,000 gallons (3x5x3x15').
I had the pool crystal clear prior to this shift in color...have been using color test strips to gauge Chem levels. Was worried my cya level was too high due to powder packs being used weekly as recommended by Leslie's. Added 4 large jugs of bleach yesterday from Fry (8.25%). Just got my water tested there and it is;
FC 5
TAC 5
CYA 60
TA 100
Ph 7.6
TDS 1200
Pho 0
Any recommendations are appreciated, been brushing and keeping pump on 24/7 with no avail.
Thanks!
Eric
*typing from smartphone, please forgive my lack of punctuation.
I have been reading and trying but finally broke down and created an account because I can not get my pool clear and could use the advice.
To start - I do not have a test kit (it's on the todo list but being a newly *broke home owner to a distressed property my wallet is tapped.), I live in AZ, pebble tec play pool roughly 10,000 gallons (3x5x3x15').
I had the pool crystal clear prior to this shift in color...have been using color test strips to gauge Chem levels. Was worried my cya level was too high due to powder packs being used weekly as recommended by Leslie's. Added 4 large jugs of bleach yesterday from Fry (8.25%). Just got my water tested there and it is;
FC 5
TAC 5
CYA 60
TA 100
Ph 7.6
TDS 1200
Pho 0
Any recommendations are appreciated, been brushing and keeping pump on 24/7 with no avail.
Thanks!
Eric
*typing from smartphone, please forgive my lack of punctuation.